Configure the settings relating to the preset positions ("Preset No." setup menu)
Click the [SETUP>>] button of "Preset Position" on the [Image/Position] tab of the "Camera setup" page. (☞ page 31)
It is possible to register, edit and delete the preset positions on this page.
When the focus, brightness, zoom factor are adjusted, the adjustment will be applied immediately to the currently displayed image on the [Image/Position] tab.
Important:
When the zoom factor is 22x or more, the setting of the preset positions will become unavailable.
Depending on the environment (such as when the temperature is below +5 °C (41 °F), for example), the moving speed of the camera to the preset position may become slower.
[Preset No.]
[SET] button: When the position of the camera is deter- mined using the [ZOOM] buttons, the [FOCUS] but- tons, the [BRIGHTNESS] buttons and the control pad/buttons, click this button after selecting the desired preset position number (1 - 64) from the pull- down menu.
The determined position will be newly registered as the preset position.
[DEL] button: When this button is clicked after select- ing the preset position number to be deleted from the
[GO] button: When this button is clicked after selecting the preset position number from the
Note:
When registering the preset position, the camera may move slightly in the direction that the camera moved last. This is a normal operation.
■Position No.
[Preset ID]
Select "ON" or "OFF" to determine whether to enable or disable the preset ID display. The preset ID display can be applied to each preset position.
ON: Displays the preset ID.
OFF: Does not display the preset ID.
Default: OFF
Note:
When "ON" is selected, the entered preset ID will be displayed at the position selected for "OSD Position" on the [Basic] tab of the "Basic setup" page.
(☞ page 20)
Important:
When "Preset ID
36