Rockford Fosgate RFX9020M manual Setup Options, Clock Operation, Mode Selection, Mute

Page 11

OPERATION – BASIC

SETUP OPTIONS

The list below shows the default Setup Options.The bracketed items are the alternate options contained within each Setup Option.

Selecting Options

1.Press and hold the VOLUME knob for about 1 second until the first Option appears {AMERICAS}.

2.Press the VOLUME Knob repeatedly to cycle through all Setup Options.The first two options only affect the Tuner Mode.

3.To change an Option, press either DIR / Buttons.

4.To store, wait 5 seconds and the Display will return to the last Mode shown.

•AMERICAS [EUR/AUST] — Allows tuning of frequencies available in different parts of the world.

•P. PLAY [EJ MUTE] — Plays the Tuner after you eject a CD while Eject Mute mutes the Tuner after you eject a CD.

•V/BAR ON [V/BAR OFF] — Displays the Volume Bar at the bottom of the Front Panel while Volume Bar Off turns it off.

•INI VOL 15 — Sets the maximum Initial Volume when the unit turns on. Initial Volume sets point of maximum volume when the unit is turned on. If the volume setting was lower than the initial volume setting when the unit is turned off, then the lower volume will be used at turn on. If the volume setting was higher than the initial volume setting, then the initial volume setting is used at turn on.This feature prevents accidental high volume turn on as well as allows high volume settings to be retained in case another preamplifier is the system’s main volume control.

•CONTRAST [VIEW 6] — Controls the view angle of the display. Allows adjustment for best visibility.

•SUM FLAT [80HZ] — Means third pair of RCA pre-outs is full-range while 80Hz means that the pre- outs are crossed-over 80Hz low-pass for subwoofer use.

•VDSEL ON [VDSEL OFF] — This is for the low voltage detction. While "ON", if the power voltage to the unit drops below approximately 10 volts, the unit will begin "beeping".Turning this "OFF" will bypass the low voltage detection.

CLOCK OPERATION

Setting the Clock Hours

1. Press and hold the DISP button for 1 second until the hour flashes.

2. Press DIR / Button to set the hour.

Setting the Clock Minutes

1.Press and the DISP button a second time and the minutes will flash.

2.Press DIR / Button to set the minutes.

Your settings will be saved after the clock has flashed for 5 seconds.

NOTE: When the radio is off (sleep mode) the clock will be displayed.

MODE SELECTION

Press the MODE button repeatedly to cycle through the following modes:

• CDP PLAY — Enables CD Player if a CD is inserted.

• FM1>FM2>AM — Enables the Tuner.

MUTE

1. Press the MUTE (7) button to dampen the volume.

2. Press the MUTE (7) button a second time to revert the audio to the previous level.

NOTE: The panel will display MUTE until the function is canceled.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Installation Introduction Table of ContentsMoisture Condensation Safety InstructionsPrecautions Source Unit and Optional CD Changer Operating TemperatureCompact Discs PrecautionsContents of Carton Installation Installation ConsiderationsInstrument Panel InstallationMounting Locations Engine CompartmentISO-DIN Mount Standard Mount7b. Connecting Speakers Using external amplifier Installation Wiring the System7a. Connecting Speakers Not using external amplifier Installation Source Unit Features Volume KNOB/TONE Controls Initial SetupReset Button Power ON/OFFMute Setup OptionsMode Selection Clock OperationTuner Options PunchPanel Display Selecting a BandAuto Store Preset ButtonsTo Set a Preset Button for buttons 1 to To Set a Preset Button for buttons 7 toOperation CD Player Basic OperationAdvanced Operation Pause CD Direct Track AccessForward/Reverse Track ScanRFX 8620M CD Changer Operation Optional Accessory Operation Wired Remote Optional RFX MR1 Wired Remote Control Optional AccessoryRemote Features Not turn on TroubleshootingDisc will not eject Also see error codes GeneralServo Error Loading ErrorEject Error ErrorMagazine Eject Troubleshooting Optional CD ChangerInitialize Error Engine NoiseUnloading Elevator ErrorFocus Error No Disc ErrorGeneral Models 9020M SpecificationsLimited Warranty Information Length of WarrantyCaractéristiques de lappareil Table DES MatièresMesures DE Précaution Source AudioConsignes DE Sécurité Contenu DE Lemballage Installation Considérations Concernant L’INSTALLATIONDisques Compacts Console centrale Emplacements DE MontageCompartiment du moteur Tableau de bordManchon Installation StandardInstallation ISO-DIN 7a. Connexion des haut-parleurs sans utiliser dampli externe Installation Câblage DU SystèmeFrançais DIR Caractéristiques DE L’APPAREILOFF Allume et éteint l’appareil Bouton DE Réinitialisation Interrupteur DE Mise SOUS/HORS Tension Power ON/OFFBoutons DE Réglage DE VOLUME/TONALITÉ Préparation Initiale Façade DémontableSélection des options Sélection DE ModeOptions DE Réglage Utilisation DE L’HORLOGESélection D’UNE Station Panneau D’AFFICHAGESélection D’UNE Bande Options DU TunerStation est programmée Boutons DE PrésélectionPour régler un bouton de présélection boutons 1 à Syntonisez la station que vous désirez programmerFonctionnement DU Lecteur CD Fonctionnement de baseFonctionnement avancé Répétition d’une pisteAvance/Retour rapide Direct Track Access Accès direct aux pistesAvance/Retour Funcionamiento Reproductor DE DC Fonctionnement Télécommande À FIL EN Option Rétroéclairage GénéralitésDépannage Pas deErreur Erreur deChargement Erreur déjectionErreur déjection Du magazine Dépannage Dépannage DU Changeur DE CDBruit de moteur DinitialisationDisque absent DéchargementErreur de Focalisation Erreur deTOCGénéralités CaractéristiquesInformations SUR LA Garantie Limitée Durée de la garantieCaracterísticas de la Unidad Fuente IntroducciónÍndice DE Materias Condensación de humedad Instrucciones DE SeguridadPrecaución Unidad Fuente Y Cambiador DE DC Opcional Temperatura de funcionamientoInstalación Consideraciones Para LA Instalación PrecauciónDiscos Compactos Contenido DE LA CajaGuantera InstalaciónLugares DE Montaje Panel centralDebajo del tablero de instrumentos Soporte EstándarSoporte ISO-DIN 7b. Conexión de altavoces Usando un amplificador externo Instalación Cableado DEL Sistema7a. Conexión de altavoces sin usar un amplificador externo Español Características DE LA Unidad Fuente Preset ScanAlimentación DE Corriente ENCENDIDO/APAGADO Botón DE VOLUMEN/CONTROLES DE TonoPreparación Inicial Botón DE ReinicioMute Opciones DE AjusteFuncionamiento DEL Reloj Selección DE ModosSelección DE Radiodifusoras Opciones DEL SintonizadorPresentación DE LA Pantalla Funcionamiento Sintonizador Selección DE BandasPara ajustar un Botón de Preselección para los botones 7 a Funcionamiento Sintonizador Botones Para PreseleccionesAlmacenamiento Automático Para ajustar un Botón de Preselección para los botones 1 aFUNCIONAMIENTO-REPRODUCCIÓN DE Discos Compactos DC Funcionamiento BásicoFuncionamiento avanzado Acceso directo a la pista Adelanto/RetrocesoExploración de pistas Pausar el DCPuesta del Cargador en el Cambiador de DC Expulsión del cargadorReinicio del Cambiador de DC Carga del disco en el CargadorCaracterísticas del control remoto Operación Control Remoto Opcional CON CableConexión de la luz Conexión del control remotoNo prende Detonan cuando se No están bien configuradosErrores La Unidad FuenteSolución DE Problemas Solución DE Problemas DEL Cambiador DE DC Descarga Error de CargaError de Enfoque Error deTOCGeneral 9020M EspecificacionesInformación Sobre LA Garantía Limitada Duración de la garantíaRockford Fosgate

RFX9020M specifications

The Rockford Fosgate RFX9020M is a high-performance marine-grade multimedia receiver designed specifically for boat enthusiasts who want to enjoy their music while out on the water. This innovative unit stands out due to its blend of advanced technologies, user-friendly features, and durable construction.

One of the main features of the RFX9020M is its large, high-resolution touchscreen display. Measuring 9 inches diagonally, the display offers bright, vivid colors and excellent visibility even under direct sunlight, which is crucial when navigating bright, reflective surfaces. The touchscreen interface is intuitive, making it easy for users to navigate through their music libraries, radio stations, and settings.

The RFX9020M is equipped with Bluetooth technology, allowing for seamless wireless streaming of music from smartphones and other devices. This feature supports both audio streaming and hands-free calling, ensuring that users can maintain connectivity without fumbling with their devices. Additionally, the receiver is compatible with Apple CarPlay and Android Auto, offering users the ability to access their favorite apps directly from the receiver's display.

Another prominent aspect of the RFX9020M is its robust audio capabilities. The receiver boasts a built-in amplifier with an impressive power output, enhancing audio quality and ensuring that even on noisy waters, the music remains clear and loud. The unit also includes a customizable equalizer, allowing users to tweak the sound to their liking, optimizing the listening experience based on personal preferences and the unique acoustics of their boat.

Durability is crucial for marine applications, and the RFX9020M does not disappoint. It features a weather-resistant design with an IPX6 rating, providing protection against water exposure, making it ideal for marine environments. The rugged build ensures longevity, even under harsh conditions encountered on the water.

Other notable features include multi-zone audio control, allowing users to manage multiple speakers throughout their boat easily, and a wide array of connectivity options, including USB ports, AUX input, and compatibility with various audio formats. Whether you're enjoying a relaxing day on the water or hosting a lively gathering, the Rockford Fosgate RFX9020M delivers impressive performance, versatility, and resilience, making it a top choice for marine audio systems.
Top Page Image Contents