TROUBLESHOOTING – OPTIONAL CD CHANGER
SYMPTOM
DIAGNOSIS
REMEDY
Error 3 | Tray loading has not completed | Press Eject, pull out the magazine, and try again. | |
(Loading Error) | after 5 seconds |
| |
|
|
| |
| Loading mechanism and motor (or | Repair mechanism and loading motor (or driving | |
| driving circuit) is defective | circuit) | |
|
|
| |
Error 4 | Tray unloading has not completed | Press Eject, pullout the magazine, and try again. | |
(Unloading | after 5 seconds |
| |
Error) |
|
| |
Unloading mechanism and motor | Have a service center repair mechanism and | ||
| |||
| (or driving circuit) is defective | loading motor (or driving circuit) | |
|
|
| |
Error 5 | Magazine tray is jammed | Repair CD changer mechanism. | |
(Elevator Error) |
|
| |
|
|
| |
Error 7 | The laser | Repair the laser | |
(Focus Error) |
|
| |
Disc is warped or damaged | Put in a new disc | ||
| |||
|
|
| |
Error 9 | Disc is warped or damaged | Put in a new disc | |
(TOC Error) |
|
| |
The laser | Have a service center repair the laser | ||
| |||
|
|
| |
NO CD | Magazine is empty or not installed | Check the magazine and insert discs | |
(No Disc Error) | in the unit |
| |
|
|
| |
NO CONN | Check the connection of | ||
(Communication | disconnected from the CDX | the CDX and unit | |
Error) | mechanism or source unit |
| |
|
|
| |
CD Changer | CDX cable is intermittent or | Check connections and repair or replace CDX | |
does not operate | severely damaged | cable as necessary | |
|
|
| |
| CDX cable is disconnected from | Check connections at the Source unit and CD | |
| the Source Unit or CD Changer | Changer and repair wiring as necessary | |
|
|
| |
Disc is jammed | Disc load/unload problem | Try Ejecting magazine. If CD Changer still does not | |
in the CD |
| operate, see your Local Authorized Rockford | |
Changer |
| Fosgate Dealer | |
|
|
|
21