Connecting the System
When connecting a Rear view camera
When using this product with a rear view camera, automatic switching to video from a rear view camera is possible when the gear shift is moved to REVERSE (R) position.
Rear view mode also allows you to check what is behind you while driving.
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.
•The screen image may appear reversed.
•The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. Do not use this function for entertainment purposes.
•The object in rear view may appear closer or more distant than in reality.
•Please note that the edges of the rear view camera images may differ slightly according to whether full screen images are displayed when backing, and whether the images are used for checking the rear when the vehicle is moving forward.
☞See Page 11.
5 m (16 ft. 5 in.)
Brown
Extension lead (for reverse signal)
Note:
It is necessary to set to “CAMERA” in “SETUP” when connecting the rear view camera.
RCA cable
(sold separately)
Rear view camera
To video output
Fuse resistor
Note:
Do not use other than the supplied extension lead.
Connection method
1. Clamp the lead.
Note:
Connect to the rear view camera. Do not connect to any other equipment.
2. Clamp firmly with
15