Pioneer AVIC-N3 installation manual Guide on

Page 11

See Page 12.

GUIDE ON

SYSTEM REMOTE

CONTROL

See Page 13.

Display unit

Note:

Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied manuals of both prod- ucts and connect cords that have the same function.

English

Español

Yellow/black

If you use equipment with a mute function (e.g. cellular telephones), connect that equipment to the Audio Mute lead. If not, keep the Audio Mute lead free of any connections.

Note:

Audio source will be set to mute or attenuate, while the voice guidance of the navigation will not be muted or attenuated. For details, see the Operation Manual.

Light green

See Page 11.

Note:

When the auto antenna function is used by connecting the blue lead to the vehicle with the auto antenna function, either turning off the ignition switch or detaching the front panel will retract the auto antenna of the vehicle.

Deutsch Français Italiano

Note:

When a subwoofer is connected to this product instead of a rear speaker, change the rear output setting in the Initial Setting. (Refer to the Operation Manual.) The subwoofer output of this product is monaural.

Blue

To Auto-antenna relay control terminal. If the vehicle has a glass antenna, connect to the antenna booster power supply terminal (max. 300 mA 12 V DC).

Nederlands

10

Image 11
Contents Installation Manual Important Information Contents Important Safeguards Connecting the System To prevent damage Before installing this productParts supplied Dock connector Connecting the systemDeutsch Français Italiano Nederlands ON/OFF Connecting the power cordGuide on Pink CAR Speed Signal Input Yellow/black Guide on NON-FADING Output When connecting to separately sold power ampDeutsch Français When connecting a Rear view camera When using a display connected to rear video output When connecting the external video component and the displayInstallation To guard against electromagnetic interference Before installingInstallation notes Installing the display unit and Hide-away unitDo not cover these areas Binding screw Flush surface screw Attach the side brackets to the Hide-away unit Installing the Hide-away unitSecure it firmly using the self-tapping screws Decide on the installation position, and drill the holesRemove the frame and the holder Install the display unit into DashboardDIN Front/Rear-mount DIN Front-mountFixing the front panel DIN Rear-mountInstalling the GPS antenna GPS antenna Metal sheet Clamp 5 pcs When routing the lead in from inside the trunk When installing the antenna outside the vehicle on the bodyWhen routing the lead in from the top of the door Enter the following settings After Installing this ProductReconnecting the battery Start the engine Press the Reset button on the display unitEnglish Español Deutsch Français Italiano Nederlands Information Importante Importantes Mesures DE SommaireImportantes Mesures DE Securite Branchement du système Pour éviter des dégâts Avant de raccorder ce produitPièces fournies Branchement du système Remarque Gauche Branchement du cordon d’alimentationEnglish Français Deutsch Français Italiano Vert clair Français Rear Output English Pour relier ce produit avec une caméra de rétrovisée Pour utiliser un écran branché à la sortie vidéo arrière Pour relier l’appareil vidéo externe et l’affichageInstallation Avant de procéder à l’installation Remarques sur l’installation Installation de l’unité d’affichage et de l’unité déportéeFrançais Deutsch Français Italiano Nederlands Vis de pression Vis à tête plate Fixez les supports latéraux sur l’unité déportée Installation de l’unité déportéeChoisissez la position d’installation, et percez les trous Retirez le cadre et le support Installez l’unité d’affichage sur Le tableau de bordMontage DIN avant/arrière Montage DIN avantFixation du panneau avant Montage DIN arrièreInstallation de l’antenne GPS Antenne GPS Plaque métallique Serre-fils 5 pièces Cheminement du fil par l’intérieur du coffre Cheminement du câble sur le haut de la portièreEntrez les réglages suivants Après installation de ce produitBranchement de la batterie Pioneer Corporation