Installation
Installing the display unit and Hide-away unit
Installation notes
•Do not install the display unit or Hide-away unit in places where it may become subject to high temperatures or humidity, such as:
*Places close to a heater, vent or air conditioner.
*Places exposed to direct sunlight, such as on top of the dashboard or the rear shelf.
*Places that may be splashed by rain, for example close to the door.
•Install this product in an area strong enough to bear its weight. Choose positions where the display unit or Hide-away unit can be firmly installed, and install it securely.
If the display unit or Hide-away unit are not securely installed, the current location of the vehicle cannot be displayed correctly.
•Do not install the Hide-away unit on the board covering the spare tire or other places which are subject to vibration.
•When the Hide-away unit is installed under a front seat, ensure that it does not obstruct the sliding action of the seat.
•When installing the Hide-away unit, choose a position that ensures there will be no con- tact with luggage. The impact of a heavy weight or sudden shock on the Hide-away unit will adversely affect the accurate display of the current location of the vehicle.
•Avoid installing the Hide-away unit in places where it will interfere with loading and unloading of the spare tire, jack, tools, etc.
•Check that a disc can be ejected with the display unit installed.
•Install the Hide-away unit horizontally on a surface within +30 degrees to –30 degrees tolerance (within five degrees to the left or right of your vehicle’s direction of travel). Mis-installing the unit with the surface tilted more than these tolerances would increase the potential for errors in the location display, and might otherwise cause reduced dis- play performance.
5°
30°
30°
•If installation angle exceeds 30º from horizontal, the display unit might not give its opti- mum performance.
30°
