10
In-Wall Touch Screen
The iTC35 (P/N 520502) Interface Kit includes an
In-Wall Touch Screen Controls
The following describes the in-wall Touch Screen controls:
7 | 1 | 2 | 3 | 4 | 6 | 5 |
In-Wall Touch Screen (Controls)
1Virtual Keyboard Toggle Button: Open and close virtual keyboard. To input text into the Digital Tablet, press this button to display the virtual keyboard. Tap the desired letters to enter text. Press the button again to close the keyboard. Note: Tap the Ctrl key, then the Q key to exit the IntelliTouch ScreenLogic program.
2Cradle USB (ActiveSync) interface: Cradle with device secure on Cradle.
Enable. Push to Enable USB (ActiveSync) link between PC and Not used by IntelliTouch ScreenLogic program.
3Launches Internet Explorer Browser: Only works if you are connected to a Broadband Internet connection.
4Minimize: Desktop Minimize current application and return to Desktop. Does not work when IntelliTouch ScreenLogic is running.
5Center Button - Suspend or Power/Reset:
•Quick push enters or exits Suspend Mode
•Push and Hold to Power Off device (hold for about four seconds until display goes off); then Push to restart and complete (Cold) Boot process. (Only required if Tablet stops responding).
Navigation buttons:
Volume Down: Push on left edge of button.
Volume Up: Push on right edge of button.
Brightness Up: Push on upper edge of button.
Brightness Down: Push on lower edge of button.
6Microphone: Microphone opening. Does not work when IntelliTouch ScreenLogic is running.
7Mono Speaker: Mono speaker opening. Does not work when IntelliTouch ScreenLogic is running.
IntelliTouch ScreenLogic User’s Guide