54
Configure iS4, iS10, and QT4 QuickTouch
You can specify any iS4, iS10, or QT4
To configure the
1.Start the ScreenLogic Configurator utility and click Configure IntelliTouch.
2.Click Next on the General Setting, Setup Circuits and the Configure Other Equipment screen. The Configure
3.Select the previously assigned circuit names that will control a valve.
•For iS10: Select iS10 #1 for the first iS10
•For iS4: Select the iS4#1 (or #2 if there are multiple remotes) tab access the setup dialog. The iS4 has four switches that can be configured.
•For QuickTouch (QT4): Select the Quick Touch tab to access the QuickTouch setup dialog. The QT4 has four switches that can be configured.
4.Tap the
5.Press Finish when done.
IntelliTouch ScreenLogic User’s Guide