Pentair Intellitouch ScreenLogic manual Lights Screen, Dim Lights

62

Lights Screen (Continued)

Name	Description
Special Lights Buttons	For lights to display in this screen, and for the Special Lights buttons to
	work, you must first assign the light in the Special Lights dialog. For more
	information, refer to Setup Circuits (Step 2 of 5), page 35.
	All Off: Switches off all lights that have been assigned in the Special
	Lights dialog in step 2 of the Configurator utility (see page 35).
	All On: Switches off all lights that have been assigned in the Special
	Lights dialog.
	Color Set: Switches on all SAM, SAL, and FIBERworks lights that have
	been assigned in the Special Lights dialog.
	Color Sync: Activates the Color Sync feature for all SAM, SAL, and
	Fiberworks lights that have been assigned in the Special Lights Dialog.
	Color Swim: Activates the Color Swim feature for all SAM, SAL, and
	Fiberworks lights that have been assigned in the Special Lights dialog.
	Color Mode Status Bar: The red bar indicates the activation status and
	current completion time. Activating the Color Set, Color Sync, or Color
	Swim features is not immediate, it can take up to one minute for the
	process to complete.

Dim Lights

Lights that have dimming functionality can be dimmed from the Lights screen. Only incandescent tungsten filament lights may be dimmed. SAm, SAL, IntelliBrite, Fiber-optic, or Halogen lights cannot be dimmed. The feature circuit must be assigned a dimmer circuit function. To assign a circuit function, see “Assign a Circuit Name and Function,“ page 38. In order to dim lights, the Dimmer Module (P/N 520406) must be installed by a qualified electrician in the Load Center.

To dim lights:

1.From the Main screen, tap the Lights tab.

2.Tap one of the Dimmer buttons to set the dimming level for the light. Dimmer percent values are from 30% to 100%. The light will adjust to the set dimming level.

Note: Macros can turn on light dimming circuits, but lights cannot be dimmed through the macro. The dimming level must be changed for each light dimming circuit.

IntelliTouch ScreenLogic User’s Guide