Pentair Intellitouch ScreenLogic manual Setup Circuits

35

Setup Circuits (Step 2 of 5)

Name	Description
Setup Circuits	Displays the available circuits for the system.
	Load Center: Displays the installed Load Center or Expansion Center(s).
	Circuit: Displays the available AUX circuits and Feature circuits (1-10).
	Depending on the model of the IntelliTouch system, the number of AUX
	circuits may vary. AUX circuits are located on the Personality board.
	Circuit Name: Assigned circuit name.
	Circuit Function: Assigned circuit function.
	On w/Freeze: Circuit assigned with freeze protection.
Circuit Settings	Displays the available circuit name, functions, and Pentair lighting features for
	selected circuits displayed in the main list.
	Circuit Name: Name of circuit (see page 40 for complete list of
	IntelliTouch circuits names). Also includes 20 user defined names.
	Circuit Function: Name of circuit function (see page 39 for list).
	On with Freeze: Select this option to switch on any circuit, such as a Pool
	and Spa circuit if the air temperature drops below 36° F. For a Pool circuit,
	the filter pump will have freeze protection. For a Spa circuit, the filter pump
	will run and the pool/spa valves will switch between pool and spa at 15
	minutes intervals throughout the freeze condition. For the Master Cleaner
	circuit, freeze protection is not needed. Pool cleaner pumps receive water
	flow from the filter pump.
	SAm/SAL Position: Position of pool or spa SAm/SAL light.
Set Custom Names button	Assign a custom name to a circuit. See page 42 for details.
Special Lights button	Assign SAm, SAL color lights, Color Wheel, and other incandesent
	colored lights to display in the Lights page. See page 36 for details.
ScreenLogic Display	Show with: Pool: Place a button for a specific circuit under "Pool" on
	the Main screen. Spa: Place a button for a specific circuit under "Spa"
	on the Main screen. Water Features: Place a button for a circuit under
	"Water Features" on the Main screen. If you choose a Lights circuit
	function or Sam/Sal light, the light button is always displayed on the
	Lights screen.
Back button	Goto previous page.
Next button	Go to the next page (Step 3 of 5)
Finish button	Save current settings and exit the Configurator utilty.

IntelliTouch ScreenLogic User’s Guide