72
Run-Once Timer
Use the
To program a
1.From the main screen, tap the Schedule tab.
2.Tap the
3.Tap the Add Program button to add a new program.
4.Assign a circuit: Tap either side arrow to scroll through the available circuits. Select the circuit to schedule. After you have finished configuring the programs in this screen, the pool, spa, and lights circuits will be displayed in groups in the status list (i.e., all pool programs are displayed together).
5.Set the start time: Tap either side arrow to set the hour for the start time.
6.Set the stop time: Tap either side arrow to set the hour for the stop time.
7.Heat Command: Tap either side arrow to set the heat mode. The options are The options are Don't Change (default), Off, H.Pump Only, H.Pump Preferred, and Heater. If “Solar present” is selected (see page 43) the options are, Don't Change, Off, Solar Only, and Solar Preferred. Use the Don't Change option to use the currently selected Heat Mode option on the Main screen. Use the side arrows to select the heat mode.
8.Change Heat Set Point: Options are: Use Manual Setting (default), and Yes. Use either side arrow to select the option. To change the existing heat set point select Yes and change the new set point in Heat Set Point option.
9.Heat Set Point: This option displays if Yes is selected in Change Heat Set Point. Tap either side arrow to set the new heat set point.
10.SmartStart: Select Yes to enable the option. This option displays when a SAm or SAL light circuit is selected in the Circuit option. If the SAM or SAL circuit was assigned a color changing light Circuit Function, when it is switched on in the Lights screen, the color lights will automatically begin changing colors.
11.Days: To set the timer to work on a particular day, tap the day to run the schedule.
12.To create another schedule, tap Add Program.
13.To delete a program: Select the program to delete from the list, and tap Delete Program.
Note: If Manual Operating Priority is enabled during a scheduled run time, the scheduled run time is reset to 12 hours (default). For more information about the General Settings option “Manual OPPriority,” see page 33.
IntelliTouch ScreenLogic User’s Guide