Pentair Intellitouch ScreenLogic Pump on during heater cool-down Select this check box if you

Page 54

44

Configure Other Equipment (Step 3 of 5) - Continued

Name

Description

Pool/Spa - Solar Equipment

Pool/Spa equipment options indicates shared equipment. If dual

 

body equipment is being used, Pool and Spa options are

 

displayed, each with their own sets of equipment.

 

Solar Present: Solar heating is available. When this option is

 

selected, Valve A: Used by Solar, is displayed in the Valve

 

Assignements list, indicating that valve A is being used for solar

 

equipment.

 

Solar is a Heat Pump: This feature uses heat pump controls

 

instead of Solar. Select this check box if a heat pump is being

 

used in place of a solar heating system.

Delays

Pump on during heater cool-down: Select this check box if you

 

have a heater or other equipment that requires that the filter pump

 

stay on for ten minutes after the equipment goes off.

Circuits Needing High Speed Pump

This list displays the Circuits and Feature circuits that need to

 

have the pump in high speed mode when switched on.

 

You can assign multiple circuits to a high speed pump. If any of

 

these circuits are on, it will switch the pump to high speed mode.

 

For example, when a fountain switches on, the pump should be in

 

high speed mode, and in slow speed mode when switched off.

 

Use the Add a Circuit or Remove Circuit button to add or remove

 

a circuit that requires a two speed pump.

Back button

Goto previous page.

Next button

Go to the next page (Step 4 of 5).

Finish button

Save current settings and exit the Configurator utilty.

Configuring Valve Actuators (Controlled by AUX or Feature Circuit)

All IntelliTouch systems can drive two auxiliary valve actuators (Aand B) for applications such as solar heating and water features. With the addition of the Valve Module (P/N 520285), installed in the Load Center, the system can accommodate up to three additional actuators (C, D, and E) for a total of five. Before configuring auxiliary valve actuators, first assign names to the AUX or FEATURE circuits (page 35). Auxiliary valve actuators can be controlled by any AUX circuit or Feature circuit. Please note that the i5 and i5S models do not include FEATURE circuits and therefore must use theAUX circuits for controlling valve actuators. By using FEATURE circuits to control valve actuators, you can conserve yourAUX circuits for high voltage relays for controlling pumps and lights. You can also use Macro circuits to couple valve actuators withAUX circuits for specific applications.

Use the following information to calculate the number of available valves:

• Main Load Center or Power Center (all models)

= 2 (A & B)

• Valve Module (if yes enter 3)

= 3 (C, D & E)

•

Number of Expansion Centers (3 x 2)

= 6 (A & B)

•

Number of Valve Modules on Expansion Center (13x 3)

= 3 (C, D & E)

TOTAL = 20

IntelliTouch ScreenLogic User’s Guide

Page 53 Page 55
Image 54
Page 53 Page 55
Contents IntelliTouch ScreenLogic User’s Guide Pentair Water Pool and Spa, Inc Contents Configuring ScreenLogic Using ScreenLogic Frequently Asked Questions FAQs and TroubleshootingAppendix Glossary 102Important Safety Precautions Important Safety Precautions Vii About this User’s Guide Technical SupportRelated IntelliTouch Manuals Introduction IntelliTouch System OverviewLoad or Power Center IntelliTouch System ComponentsIntelliTouch Interfaces IntelliTouch ScreenLogic in your home IntelliTouch ScreenLogic Interface Accessory Kits IntelliTouch Interface ScreenLogic KitsBlank PDA, in-Wall Touch Screen Tablet Overview Personal Digital Assistant PDA Description PDA Front and Side ViewsPDA Rear View In-Wall Touch Screen In-Wall Touch Screen ControlsTablet Overview Tablet Controls and LightsTablet Functions Tablet LightsCold Boot/Power On-Off/Reset PDA Using your ScreenLogic InterfaceImportant Precautions Tablet, PDA, and In-wall Touch Screen Save System Settings Tablet and In-Wall Touch ScreenBattery and Power Management Tablet Low Battery Condition Tablet and PDAPower on and OFF Tablet and PDA Battery and Power Management PDAInstallation Before You Begin Tools RequiredConnection Steps Summary Less walls and ceilings equals better wireless reception ScreenLogic Location RequirementsRecommended Wireless Router and Protocol adapter Location Location Requirements Cable Distance LimitsProtocol ScreenLogic Adding Range Extender Kit for Large Home and Properties Connecting without Broadband Internet Access Connecting to your Home Network with Broadband Access Connecting to an existing home networkRJ11 for DSL Coax for Cable Connect to the Protocol Adapter Proceed to Connect to the Personality Board,Connecting to the Personality Board Personality board Connector J7 or J8 To start up the system Blank Configuring ScreenLogic Accessing IntelliTouch ScreenLogic Configuration Program Compatibility with IntelliTouch Systems Start the Configurator Utility on the PDATransfer Time from the Configurator Utility Start ScreenLogic ProgramScreenLogic Configuration and Maintenance Screen General SettingsName Description Calibrating Temperature Sensors Changing the Display to Show Fahrenheit to CelsiusSetup Circuits Feature Circuit Configuration Button Special Lights ButtonFeature Macro Circuits Overview Freeze ProtectionAssign a Circuit Name and Function IntelliTouch Circuit Functions IntelliTouch Circuit Names Creating a Feature Circuit Macro Creating Custom Names for Auxiliary Circuits Display a Circuit Function Button on the Main ScreenIntelliTouch Indoor Control Panel Circuit Names Configure Other Equipment Circuits Assigned to Valve Assign a circuit to a valvePump on during heater cool-down Select this check box if you Configuring Valve Actuators Setting up Additional Equipment Setting up a Two-Speed PumpSetup Solar Equipment and Heat pump option Set a Cool-Down Cycle for the HeaterEnable Manual Spa Heat Control Chlorine GeneratorActivate the Chlorinator Control Interface Configure IntelliFlo Filtering dialog Configure IntelliFlo Configure IntelliFlo Configure iS10 Spa-Side Remote Configure iS4, iS10, and QT4 QuickTouch Using ScreenLogic Home Screen Main Screen Pool/Spa heat controls The HeatSource Configuring Pool and Spa Heating System Options Changing Spa Heat Settings Change the Pool and Spa TemperatureChanging Pool Heat Settings Main Lights ScreenColor Lights Tab Lights Screen Dim LightsSpecial Lighting Features Lights Screen Configure Set Colors Tab Color Set Name DescriptionLights Screen Configure Swimming Colors Tab Color Set Lighting Feature Set up Swimming Colors Color SwimSwitching Lights All on/All off Color SyncLights Screen IntelliBrite Color light show and fixed color buttonsSave and Recall buttons Schedule Screen Schedule Feature Schedule Run Once Screen Run-Once Timer Schedule Egg Timer Screen Setting the Egg Timer Count Down History Screen Equipment System Status Screen System Error Messages System Delay Cancel FeatureEnable/Disable Spa-Side Remotes Equipment Chlorinator Screen Chlorinator Status and Controls ScreenEquipment IntelliFlo Screen IntelliFlo Status and IntelliFlo Controls ScreenIntelliFlo Status and IntelliFlo Controls Screen IntelliFlo Status and IntelliFlo 4x160 Controls Screen IntelliFlo Output Pump Off/Pump On See page 80 for detailsBlank Frequently Asked Questions FAQs Troubleshooting ScreenLogic Tips and FAQs ScreenLogic Technical Support QuestionsScreenLogic Error Messages To enter wireless settings for the TabletIntelliTouch ScreenLogic User’s Guide PDA First Time Setup Instructions IntelliTouch ScreenLogic User’s Guide PDA On/Off Button Turn off Backlight PDA Tips and FAQsStarting Up the Tablet How can I calibrate the PDA screen?Do I need to load any software to get started? Is there anything I need to assemble before I turn it on?My Digital Tablet will not switch on Connecting Please Wait messageHow do I switch the Tablet off? How do I make the panel brighter/darker?Cleaning the Touch Screen Tablet comes with a desktop cradle what are its functions?IntelliFlo Alarms and Warnings Suction BlockageIntelliFlo 4x160 Alarm and Warnings Alarm and warnings LED sequenceAppendix Range Extender Kit Description ScreenLogic Wireless Connection Kit Load Center to Protocol Adapter wireless connection diagramConnecting remotely to your system HomeLogic Management and Control Solution In-Wall Touch Screen Installation Installation is complete Glossary Glossary 104 Page 520493 Rev. C

Intellitouch ScreenLogic specifications

Pentair Intellitouch ScreenLogic is a cutting-edge control system designed for pool and spa automation, delivering enhanced convenience and efficiency for homeowners. This innovative system allows users to control and manage their swimming pool and spa features through a user-friendly interface, providing comprehensive management from both local and remote locations.

One of the standout features of Intellitouch ScreenLogic is its intuitive touchscreen interface. Users can easily navigate through various settings and functionalities, ensuring a hassle-free experience when adjusting pool temperatures, controlling lights, and managing water features. The interface is designed to be visually appealing and straightforward, accommodating both tech-savvy individuals and those who might find technology overwhelming.

The system's connectivity options are another significant advantage. Intellitouch ScreenLogic integrates seamlessly with a variety of devices, including smartphones and tablets, through the ScreenLogic2 app. This feature allows users to control their pool systems anytime, anywhere, providing unparalleled remote access. Whether you want to heat the spa before arriving home or change the lighting for an evening gathering, the app allows you to manage all aspects effortlessly.

Enhancing customization, Intellitouch ScreenLogic supports various automation options, which can be tailored to meet individual preferences. Homeowners can set schedules for cleaning systems, heating, and lighting, allowing for energy-efficient management. This automation not only adds convenience but also contributes to reducing energy consumption and operational costs.

Furthermore, Pentair's advanced technologies extend beyond simple controls. The system can monitor water quality and provide alerts regarding chemical levels, ensuring that pools remain safe and hygienic. Additionally, the integration of energy-efficient components, such as variable-speed pumps and LED lighting, optimizes energy use, leading to further savings.

In summary, Pentair Intellitouch ScreenLogic stands as a leading solution in pool and spa automation, boasting a user-friendly touchscreen interface, robust remote connectivity, customizable automation features, and advanced monitoring technologies. By investing in this innovative system, pool owners can enjoy enhanced convenience, efficiency, and peace of mind, making pool maintenance and enjoyment an effortless experience. Whether it’s managing day-to-day operations or ensuring the best conditions for swimming and relaxation, Intellitouch ScreenLogic is designed to elevate the experience of pool ownership.
Top Page Image Contents