85
How do I exit the ScreenLogic program while using the Tablet or
Press the first button (from the left side) on the front of the Tablet or
ScreenLogic Error Messages
If a system error has occurred with the IntelliTouch equipment, a message is displayed in the System Status box.
1.From the ScreenLogic main screen, tap the Equipment tab.
2.The error message is displayed in the System Status box. If there are multiple errors, the error messages will be cycled in the status box located in the Equipment screen.
My Tablet or PDA wireless settings have been deleted accidentally, what do I do?
If your Tablet or PDAwireless settings are not present, a wireless connection cannot be established with the wireless router. You will need to
To enter wireless settings for the Tablet:
When a wireless connection cannot be established, a red x displays over the wireless connection icon located in the
1.
2.Tap the Wireless Information tab,
3.Uncheck the “The Key is provided automatically,” box.
4.Enter your WEP encryption key in the Network key field. The WEP encryption key is located on a label on the bottom of your wireless router.
5.Tap the OK button to save and exit the dialog.
6.Tap the OK button to close the dialog.
To enter wireless settings for the PDA:
When a wireless connection cannot be established you will see a red x displayed over the wireless connection icon located in the
1.Tap the wireless icon (Signal strength bars) in the
2.Tap Edit Wireless Profiles at the bottom of your screen.
3.Tap PENTAIRx (where
4.Tap Network Key from the list of available networks.
5.Uncheck the “The Key is provided automatically,” box.
6.Enter your WEP encryption key in the Network key field. The WEP encryption key is located on the bottom of your wireless router.
7.Tap the OK button to save and exit the dialog. Tap the OK button, then the X to exit.
How many ScreenLogic Protocol adapters can I install in an IntelliTouch system
You can install one Protocol adapter per IntelliTouch system (one per Load Center). However, a total of four ScreenLogic interfaces can be used simultaneously with the Protocol adapter. For more information about interface accessory kits, refer to “ IntelliTouch ScreenLogic InterfaceAccessory Kits,” page 5.
IntelliTouch ScreenLogic User’s Guide