Pentair Intellitouch ScreenLogic manual Color Lights Tab

61

Color Lights Tab

For lights to display in the Color Lights screen, and for the Special Lights buttons to work, you must first assign the light in the Special Lights dialog. For more information, refer to Setup Circuits (Step 2 of 5), page 35. From the Lights screen you can switch lights on or off and dim selected incandescent lights. Pentair SAm and SAL lights cannot be dimmed. Before lights can be dimmed a qualified electrician must wire them with the IntelliTouch Dimmer Module (P/N 520406) in the Load Center. Only incandescent tungsten filament lights may be dimmed (Halogen lights cannot be dimmed). Before a light is displayed on this screen, circuits must first be assigned as a light in the “Setup Circuits” page of the Configurator utility. The light circuit name must be assigned a dimmer circuit function. To assign a circuit function, see “Assign a Circuit Name and Function,“ page 38.

Name	Description
Lights	This screen can display up to 40 assigned lights.
	The following are examples of different lights that can displayed in the
	Color Lights screen. To dim a selected light, select a dimming percent
	value button from 30% to 100%.
	BBQ Light: Select the Off button to switch the light off. To dim the light,
	select a dimmer button from 30% to 100%.
	Entry Light: Select the Off button to switch the light off. To dim the light,
	select a dimmer button from 30% to 100%.
	Waterfall: Select the Off button to switch the light off. To dim the light,
	select a dimmer button from 30% to 100%.
	Pool SAM 1: Select the All Off or All On button to switch the light off or
	on. In order to use the "Special Lights" buttons, the light must be assigned
	in the "Special Lights" dialog (see page 35) .
	Pool SAM 2: Select the All Off or All On button to switch the light off or
	on. In order to use the "Special Lights" buttons, the light must be assigned
	in the "Special Lights" dialog (see page 35) .

IntelliTouch ScreenLogic User’s Guide