Citizen D710/D716 instruction manual Switching the Mode, Standard Mode, Dive Plan

Switching the Mode

•The mode of the standard mode changes in the order of time, travel time, destination timer, alarm, chronograph, timer and system monitor each time the lower right button (A) is pressed in the standard mode.

•The mode changes in the order of standard mode, dive plan mode, scuba diving log mode, skin diving log mode and surface mode each time the lower left button (D) is pressed.

•The watch automatically switches to the dive mode (preliminary dive display) when the water sensor gets wet in any mode (excluding the infrared communication mode and low power mode).

•The watch switches to the infrared communication mode (initial display) when the lower left button (D) is pressed for at least 2 seconds and then released in any mode (excluding the dive mode and low power mode).

[Standard Mode]

		Time
							Travel time		Destination timer	Alarm
				(A)				(A)	(A)
											(A)
(D)				(A)
							System monitor		Timer	Chronograph
				(A)				(A)		(A)
		(D)
											(D)
		Surface
						Skin Diving Log			Scuba Diving Log	Dive Plan
(only when activated)
					(D)			(D)		(D)
				If the water sensor gets wet						The lower left button (D)
										pressed for at least 2 seconds
			[Dive Mode						[Infrared Communication
	(preliminary dive display)]								Mode (initial display)]

*Refer to the section on "Using the Dive Mode" for further details.

*Refer to the section on "Data Communication Functions" for further details.

28