Citizen D710/D716 instruction manual Explanation of Display During Water Depth Measurement

1. Explanation of Display During Water Depth Measurement

The display during diving differs between the AIR setting (air diving) and NITROX setting (NITROX diving). Even in the case of performing scuba diving, the watch displays the skin diving display until 3 minutes or more have elapsed continuously at a depth of 1 m (4 ft) or more.

A. Display during AIR Setting

During Skin Diving

	Current time
Dive time			(A)
Current
depth			(A)
		Dive condition
Current water temperature

Body nitrogen level graph

Maximum depth

•Maximum depth and the body nitrogen level graph are called up for about 10 seconds when the lower right button (A) is pressed once.

				When 3 minutes or more elapse continuously at
				a water depth of 1 m (4 ft) or more
During Scuba Diving
	<During No-Decompression Diving>		No-decompression limit time (NDL)
	Dive time		(A)				Current time
	Current						Body
	depth		(A)
							nitrogen
							level graph
		Current water temperature			Maximum depth
	When no-decompression limit time is					When decompression stop instructions
	exceeded					are followed
	<During Decompression Diving>		Total ascent time
			(A)				Current time
							Maximum
							depth
			(A)
							Current
	Decompression stop instructions (depth, time)						water
							temperature

•If diving is continued beyond the no-decompression limit time, an alarm sounds and decompression stop instructions (STOP) are displayed on the display indicating that decompression diving has occurred.

•Pressing the lower right button (A) once during scuba diving calls up the current time, maximum depth, water temperature and body nitrogen level graph (the body nitrogen level graph is not displayed during decompression diving).

64