2. Explanation of Warning Functions
Insufficient Charge Warning
When the watch becomes insufficiently charged, "BATT" flashes in the lower left corner of the display in all of the modes of the standard mode. Operation of the following functions is limited while this warning function is activated.
• The watch does not switch to the dive mode even if the water
Flashing
sensor gets wet. (The watch automatically switches to the charge
level indicator display of the system monitor mode when the water sensor gets wet.)
•None of the alarms sound.
•Data cannot be transferred by infrared communication. (However, data can be transmitted to a personal computer by USB communication.)
•The EL light is not illuminated.
When this warning function is activated, charge the watch by attaching to the charger as soon as possible. The display will return to normal once the watch is sufficiently charged.
*None of the dive alarms sound when the insufficient charge warning function is activated during diving. Although the dive computer will function normally for about 30 minutes after “BATT” starts to flash, the log data for that dive is not recorded after “BATT” has started flashing. Promptly begin to ascend it this warning function is activated during diving.
*If the watch remains insufficiently charged after the insufficient charge warning function has been activated, it switches to the low power mode after about 2 days. Please note that if the watch continues to be left uncharged in the low power mode, all functions stop and all watch settings return to the initial (default) settings.
File Error Warning
When the amount of available memory in flash memory becomes |
|
low, "FILE" flashes in the lower left corner of the display in all of the |
|
modes of the standard mode as well as in the dive mode. The |
|
watch automatically switches to the flash memory status display of | Flashing |
the system monitor mode when the water sensor gets wet while this |
warning function is activated. Please note that although it is
possible to use the watch for diving in this state, log data may not be recorded in flash memory during diving.
The file error warning function is also activated and additional log data is not recorded if the duration of a single dive exceeds 2 hours or if more than 15 dives are made in a single day. The file error warning function may also be activated when the water temperature during diving is low. It may not be possible to receive watch settings by data communication while the file error warning function is activated.
When the watch has switched to the file error warning display, perform the garbage collection procedure in the system monitor mode of the standard mode. The display returns to normal following completion of garbage collection.
48