4. Using the Alarm Mode
Once this alarm is set (ON), the alarm sounds for approximetely 30 seconds at the same time every day and "Alarm" is displayed on the display. The alarm can be turned off by pressing any button when it is sounding. In addition, the alarm tone can be selected from 15 types of alarm sounds when setting the alarm.
| [Alarm ON] | [Alarm OFF] |
| Current time |
|
(C) | (B) | (B) |
| (B) |
|
(D) 
(A)
Alarm time
A. Alarm ON/OFF and Alarm Monitor
The alarm is switched between ON (set) and OFF (canceled) each time the upper right button (B) is pressed once in the alarm mode. Once the alarm has been set, the alarm
ON mark 
is displayed in the time mode. When the upper right button (B) is pressed continuously in the alarm mode, you can monitor the selected alarm tone for as long as the upper right button (B) is pressed.
B. Setting the Alarm
(1)The watch switches to the correction state (display flashes) when the upper left button
(C)is pressed for at least 2 seconds and then released during then the normal display in the alarm mode. The flashing item can be corrected.
(2)The flashing item changes in the order shown below each time the upper left button (C) is pressed once.
• Pressing the upper left button (C) and then releasing in the alarm number correction state returns the watch to the normal display.
Hours
(C)
Minutes
(C)
Alarm
number
Flashing
38