Citizen D710/D716 Communication by USB Interface, Data Communication with PC, Watch Settings

Page 73

*Pressing the lower right button (A) once when any menu is displayed returns the display to the previous menu.

*The watch returns to the time mode of the standard mode when the lower right button (A) is pressed once during the initial infrared communication display.

*The watch can be immediately returned to the time mode of the standard mode by pressing the lower left button (D) for at least 2 seconds and then releasing when any menu is displayed.

*The display automatically returns to the previous menu when none of the buttons are pressed for about 1 minute during the display of any menu (or for about 3 minutes during time data transmission display).

*The watch automatically returns to the time mode of the standard mode when none of the buttons are pressed for about 1 minute during the initial infrared communication display.

2. Communication by USB Interface

The communication unit is used during data communication by USB interface.

*Please purchase the separately sold communication unit when you want to use a USB interface for communications between the watch and PC.

*When performing data communications with your PC using the communication unit, it is necessary to install a USB driver in the PC being used in advance.

*Refer to “Communication Unit” in this manual for more details on the communication unit and driver installation procedure.

3. Data Communication with PC

There are two ways for transferring data between the watch and a personal computer. The first involves using the infrared communication function, and the second involves using the communication unit (sold separately). Data can be edited on the PC using the software provided (contained on the accessory CD-ROM) after transferring data to the PC. The following indicates data that can be transferred to the PC.

a. Diving Log and Profile Data

/Diving data that has been transferred to the PC can be edited and managed using the AQUALAND GRAPH Nx software provided. For further details, refer to the section on "Accessory Software" in this manual and the "AQUALAND GRAPH Nx" manual contained in the accessory CD-ROM.

b. Watch Settings

/Watch settings that can be transferred to the PC include location information (name and time difference from UTC), alarm, timer, travel time, daily graphic and dive alarm settings. Setting data incorporated using the "CAPgm" software provided can be edited on the PC, and edited settings can be sent back to the watch. For further details, refer to the section on "Accessory Software" of this manual and the "CAPgm" manual contained in the accessory CD- ROM.

*The accessory software contained in the accessory CD-ROM must be installed prior to transferring data between the watch and PC.

*Perform infrared communication and communication using the USB interface within a temperature range of +10°C to +35°C (50°F to 95°F). Data may not be able to be transferred if outside this range.

73

Image 73
Contents D710/ D716 Page English English English English Before UsingIntroduction Important Notes Safety Precautions Observe at All TimesGeneral Cautions Regarding Diving Page Page Page Contents Page Using the Scuba Diving Log Mode and Skin Diving Log Mode Watch Checking Accessories Prohibited Prohibited Use During Diving Page Page Various watch functions can be set on your PC FeaturesOther Convenient Functions This watch is of the rechargeable typeNames and Functions of Components ChargerPcs. of size AA Alkaline Batteries Installation Procedure Charging the Watch Watch Display During Charging Names of Components Standard ModeWatch Display Modes Functions Scuba Diving Log Mode Dive Plan ModeSkin Diving Log Mode Dive ModeHow to Read the Charge Level Indicator of the watch Charge Level Indicator and Continuous Usage TimeAmount of Charge Usage timeContinuous Usage Time UsingUsingthetheELELLightLightStandard Mode Switching the ModeDive Plan Page Using the Time Mode Using the Standard ModeSwitching the Display Day DisplaySetting the Time and Date Daily Graphic Display Setting the Travel Time Using the Travel Time ModeNormal Display Time Difference Display Before Interchanging ProcedureAfter interchanging During interchangingSetting the Destination Timer Using the Destination Timer ModeArrival Time Remaining Time Display DisplayDestination Timer Measuring Procedure Time up Remaining TimeElapsed Time Display Displaying Arrival Time Set during MeasurementAlarm ON/OFF and Alarm Monitor Using the Alarm ModeSetting the Alarm Alarm on Alarm OFFPage Chronograph Timing Procedure Using the Chronograph ModeReading the Display Setting the Timer Using the Timer ModeTimer Setting Display Setting display Timing Stop Time up Timer Measuring ProcedureRepeating Measurement Charge Level Indicator Using the System Monitor ModeCharge Level Indicator Flash Memory Status Display Garbage CollectionFlash Memory Status Display Garbage Collection Operating ProcedurePage Locations Pre-registered in this Watch Locations Displayed by this WatchLocation IrWW During AIR diving Explanation of Warning Functions File Error WarningInsufficient Charge Warning Water Sensor Check Warning Abnormal Pressure Detection Error WarningAscent Rate Warning Abnormal Depth WarningPermanent Error Warning Decompression Diving ErrorExceed Maximum Depth Warning Decompression Diving WarningPO2 limit Error Permanent ErrorOxygen Toxication Time Error PO2 Limit WarningDiving Terms Used by this Watch Repetitive Diving Safety StopDecompression Diving Decompression StopDive Time Minimum Water Temperature Min.w.tempTime Maximum Depth Max. DepthSwitching the Display Using the Dive Plan ModeDive Condition Display Dive Plan Display Dive Alarm Display AIR DivingHigh-Altitude Setting Nitrox SettingSwitching from Nitrox Setting to AIR Setting Nitrox Setting and Oxygen Concentration SettingAIROxygen Concentration Setting StateNITROX Dive Condition MarksDepth Alarm Dive AlarmDive Time Alarm Calling Up No-Decompression Limit TimeDive Alarm Monitor Setting the Dive AlarmDepth No. of times Alarm sounds Dive time AIR diving Nitrox diving Calling Up Scuba Diving Log DataCalling Up Skin Diving Log Data Deleting Log Data Water Depth Measurement Display Skin diving Using the Dive ModeExplanation of Display During Water Depth Measurement Display during AIR SettingDuring Decompression Diving Display during Nitrox Setting Safety Stop Graph Display Safety Stop Graph and Decompression Stop GraphDepth Measurement Decompression Stop GraphEnding the Dive Mode Water Temperature MeasurementDive Time Measurement No. of Dives Per Day and Recording Log DataUsing the Surface Mode Time Display Date Display Low power mode Temporary functionNo Display Setting the Time and Date Infrared Communication Data Communication FunctionsCommunication Range Display Sequence in Infrared Communication Mode Infrared Communication Mode Operating ProcedureCommunication by USB Interface Watch SettingsData Communication with PC Diving Log and Profile DataUSB Communication Preparations for CommunicationVAttachment of Ferrite Core Sending and Receiving Data Data Communication Between WatchesReceiving Transmitting WatchWatch ProcedureAll Reset Formatting Flash Memory Operating Environment Accessory SoftwarePrinter When Registering Animated Images in an AlbumWeb Browser Installing CAPgm Watch Setting Software Page Startup of Aqualand Graph Nx and CAPgm Startup and Ending Aqualand Graph Nx and CAPgmEnding Aqualand Graph Nx and CAPgm Communication Unit Leg Removable USB Cable ConnectorInstalling Batteries Using the Communication UnitAttaching and Removing the Watch Windows98 or Windows98 SE Installing the USB DriverPage Windows Me Confirm that your personal computer has started up normally Windows2000WindowsXP Page Problem Possible Cause Corrective Action Reference TroubleshootingUnable to Slow Sounds Examples of Use Indication Handling Precautions for the watchTemperatures Cleaning the WatchStatic Electricity Chemical Agents, Gases and Mercury ShocksStorage Watch SpecificationsCharger Communication Unit Sold Separately