NordicTrack CTL8750, CTL8250, CTL8500 Preventive, Weekly Maintenance, Monthly Maintenance

Page 30

PREVENTIVE

M AINTENANCE

Regular maintenance is necessary for optimal performance and long treadmill life. Please read and follow all instructions below. If the treadmill is not maintained as described, components may wear excessively,

the treadmill may be damaged, and the warranty will be voided.If you have questions about maintenance, call Customer Care toll-free at 1-800-201-2109, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding

holidays). CAUTION: Make sure to remove the key and unplug the power cord before performing any main- tenance procedures.

WEEKLY MAINTENANCE

1.Inspect and properly tighten all external parts of the treadmill.

2.Apply a mild multi-purpose cleaner to a 100% cotton cloth and remove any dust and grime from the handrails, uprights, foot rails, frame, and motor hood. In addition, wipe the walking platform along the sides of the walk-

ing belt.

Do not wipe under the walking belt.

Apply a small amount of mild multi-purpose cleaner to a 100%

cotton cloth and wipe

the console and the screens.

Do not spray cleaner directly onto the treadmill or use

ammonia or acid-based

cleaners.

 

3.Make sure that the walking belt is centered and properly tightened. If it is centered and runs smoothly, do not make any adjustments. If the walking belt needs to be adjusted, refer to pages 33 and 34.

MONTHLY MAINTENANCE

1. Remove the two screws attaching the motor hood and lift off

 

the motor hood. Using a hand-held vacuum, clean the area

Motor

covered by the motor hood.

Be careful to avoid touching

Belt

any components.

 

 

 

2.Check the motor belt for wear and cracks. If the motor belt needs to be replaced, refer to page 44 to order a new motor

belt.

 

 

 

3. Plug in the power cord and insert the key into the console.

 

 

Press the START button.

Be careful to avoid injury; keep

 

 

your hands away from moving parts and make sure that

 

 

your clothing cannot become caught in moving parts.

While the walking belt is moving, check the motor

for arcing. Next, check the treadmill for unusual noises or odors. If any of these problems exists, call Customer

 

Care toll-free at 1-800-201-2109.

Remove the key and unplug the power cord.

Reattach the motor hood with

the two screws.

 

 

 

4. The walking platform should

not

be lubricated before the

 

 

treadmill is used. However, lubricant should be applied after

 

 

every month of use. To purchase a lubricant pump or lubricant

 

 

packets, call Customer Care toll-free at 1-800-201-2109.

 

 

CAUTION: Before applying lubricant, remove the key and

 

 

unplug the power cord.

 

 

 

 

To use a lubricant pump,

first prime the pump. Insert the

 

 

 

A

wand under the walking belt in the location shown by dotted

 

 

 

 

line A. Center the nozzles under the walking belt and apply

 

 

lubricant as you slide the wand forward to dotted line B. Then,

 

 

pull the wand back out.

To use lubricant packets,

open one

packet, reach under one side of the walking belt as far as you can, and apply the entire packet between dotted line A and

dotted line B. Then, apply a second packet under the other side of the walking belt in the same way. have applied lubricant using a lubricant pump or lubricant packets, plug in the power cord, insert the key, adjust the speed to 3 mph, and walk on the walking belt for two minutes to spread the lubricant.

B

Apply packet here

Insert wand here

After you

29

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Serial Number Decal Mon.-Fri., 6 a.m.-6 p.m. MSTOntents How to Connect your CD Player to the TreadmillSix-month Preventive Maintenance Record SectionPage Wear appropriate exercise clothes when PrecautionsUse the treadmill only as described in this manual Use an extension cordNever insert or drop any object into any opening Arning Ecal PlacementDisconnect power Before servicingEfore YOU For your benefit, read this manual carefully beforeHOW to Readmill Firmly tighten the four Handrail Bolts Firmly tighten all eightUpright Bolts Is eliminatedBefore moving the treadmill, make sure that HOW to OVEDue to the size and weight of the treadmill, mov Handrails LiftImproper connection HOW to OnnectHOW to Connect a Catv Cable Equipment-grounding conductor canIf your treadmill has the Basic console or HOW to Onnect Your Player toHOW to Connect Your Portable CD Player Head Audio Cable PhonesHOW to Pgrade Your Or call Ground Zero toll-free atGrams that adjust the speed and incline HOW to AsicFeatures of the Console Matrix Main DisplayGetting Started HOW to USE the Manual Mode Select the manual modeChange the incline of the treadmill as desired Stand Pulse/% MaxMeasure your heart rate if desired Avoid Moving your HandsHOW to USE Preset Programs Select one of the six preset programsWhenkey.the program is completed, remove Restart the program, press the StartMent Speed + button. The walking belt will begin toChest pulse sensor HOW to USE PULSE-DRIVEN ProgramsEnter a target heart rate setting Select one of the three pulse-driven programsSelect the fitness test program HOW to USE the Fitness Test Program8Whenkey.the program is completed, remove Enter your age Your must enter your age to use the fitnessTen fitness levels fitness level Cally increaseRent four-minute level is completed Fitness test program will conTreadmill is about to change To the next settings of the CD programPress the Play button on your CD player For speedPress the Enter AGE/WT button to view HOW to USE the Maintenance ModeHold down the Enter AGE/WT button Press the Enter AGE/WT button againButton until the words Safety KEY Disabled appear If you are using a cable TV connection, press the +Hold down the Reset button and the + To exit the maintenance mode at any time, holdHOW to Reset the Service Distance Press the Enter AGE/WT button four timesAddi That adjust the speed and incline Treadmill toFlat Screen Television Matrix Main Display Compatible chest pulse sensor not includedAdjust the volume HOW to USE the Workout TV ConsolePut on headphones not included if desired JackHOW to Remove it Touchscreen Main DisplayAddition, you can use the console’s touchscreen to go Weekly Maintenance Monthly MaintenancePreventive Turning the Walking Platform Remove the key and unplugReplacing the Walking Platform Tighten all Treadmill CleanCheck Motor beltPreventive Adjustment Symptom the Power does not Turn onSymptom the Power Turns OFF During USE Walking platformSymptom the Walking Belt is OFF-CENTER Repeat until the walking belt is properly tightenedExercise Steps XerciseFactors in a Sensible Diet Establish personal fitness goalsToe Touch Stretch Weight Loss TipsWarm up before you begin Hamstring StretchStretch again at the end of your exercise 8session Benefits of Aerobic ExerciseGet FIT with NordicTrack Participate in strength trainingWorkout Tips Workout ProgramsImited Arranty Unauthorized Changes to Warranty Receipt of Parts and ServiceExclusive Warranty State LawsPart DescriptionOS. C TL82500, C TL85000, C 131 124 122 125 127 106 107 105 104115 110 112 120 113 111 108116 R0901A 116HOW to Rder Eplacement Parts
Top Page Image Contents