NordicTrack CTL8750, CTL8250, CTL8500 Firmly tighten all eight, Upright Bolts, Is eliminated, Mill

4.Refer to step 1. While a second person holds the

Uprights (95, 97), remove the two Upright Bolts (96).

Slide the Uprights (95, 97) fully onto the brackets on the

Frame (not shown).	Be careful to avoid pinching your
hands or the wires.	Attach each Upright with four
Upright Bolts (96) as shown.	Firmly tighten all eight
Upright Bolts.

Firmly tighten the four Handrail Bolts (99).

5.After the treadmill is placed in the location where it will be used (see HOW TO MOVE THE TREADMILL on page 9), make sure that both Rear Feet (5) and both front Wheels (not shown) rest firmly on the floor. If the treadmill rocks even slightly, turn the right Rear Foot clockwise or counterclockwise until the rocking motion

is eliminated.

4
91
99
	91
97	95
	96
	96
5
	5

6. Make sure that all parts are properly tightened before you use the treadmill.	Keep the included allen
wrenches for adjustment purposes. To protect the floor or carpet from damage, place a mat under the tread-
mill.

8