NordicTrack 9600 Adding channels, To exit the maintenance mode, HOW to Reset the Lube Reminder

15 Press the ENTER AGE/WT button again and delete or add TV channels.

After all valid TV channels have been stored in the console’s memory, you can delete unwanted channels or add other channels. To delete or add

a channel, first press the CHANNEL + and – but- tons until the channel appears in the main display.

	Next, press the + or – button above the ENTER
	AGE/WT button until the words DELETE or ADD
	appear in the main display. Then, select the next
	channel that you want to delete or add. Repeat
	this process until you have finished deleting or
	adding channels.
	Hold down the ENTER AGE/WT button and the
16
	RESET button simultaneously for two seconds

to exit the maintenance mode.

To exit the maintenance mode at any time, hold down the ENTER AGE/WT button and the RESET button simultaneously for two seconds.

HOW TO RESET THE LUBE REMINDER

If the words LUBRICATE DECK appear in the main display when the maintenance mode is selected (refer to step 9 on page 24), follow the steps below to reset the lube reminder.

1 Insert the key into the console.

Refer to GETTING STARTED on page 14.

2	Hold down the STOP button and the RESET
	button simultaneously for three seconds.

25