Life Fitness FIT 3 manual Step

Page 14

13

 

 

14

 

 

65

 

 

41

 

 

19

61

3/8 X 164mm

67

66

68 BLACK

FIGURE 10

 

 

 

STEP 10:

Insert four 5-1/2” PIVOT SHAFTS (41) into the LAT/LOW FRAME (14) and the LAT/LOW SEAT (13) as shown in FIGURE 10.

SECURELY assemble four LAT/LOW PLATES (19) to the LAT/LOW SEAT (13) and to the LAT/LOW FRAME (14) using eight BLACK RH CAPS (68), four 3/8 X 164mm BOLTS (61), eight 3/8” SAE WASHERS (66), eight 3/8” RH WASHERS (67) and four 3/8” LOW HEIGHT LOCK NUTS (65) as shown in FIGURE 10.

 

69

3/8 X 67mm

55

 

14

 

2

 

67

FIGURE 11

66

65

STEP 11:

SECURELY assemble FOOT REST (2) to the LAT/LOW FRAME (14) using four RH CAPS (69), two 3/8 X 67mm BOLTS (55), four 3/8” SAE WASHERS (66), four 3/8” RH WASHERS (67) and two 3/8” LOW HEIGHT LOCK NUTS (65) as shown in FIGURE 11.

14

Image 14
Contents FIT Series FIT-3 LEG Press Main Unit Parts List LEG Press Parts List Height Lock NUT SAE Washer 22 1/2 X 3 Shoulder Bolt Flange Spacer Step 104 3/8 X 117mm Remove CAP Before Assembly 55 3/8 X 67mm Step 100 110 120 130 140 150 Tighten Lubrication Note Step X 50mm Shaft to rotate freely Step 56 3/8 X 70mm 51 3/8 X 43mm X 164mm Spring PIN X 164mm X 106mm Button Head Cable to the second set of holes Loctite X 70mm X 67mm 54 3/8 X 61mm 51 3/8 X 43mm Step Black 49 3/8 X 25mm X 90mm RH Washers 107, one 2-7/8 X 2-1/4 Cable 100 110 120 130 140 150 X 67mm 105 107 X 117mm 109 109 107 109 105 107 106 Step Step Step Adjustment Serial # Warranty Information