85 |
|
|
|
| 55 3/8 X 67mm |
10 |
|
|
65 |
|
|
67 | 104 | 3/8 X 117mm |
|
| |
66 | 58 3/8 X 90mm | |
| ||
| 69 |
|
8 |
|
|
FIGURE 4 |
|
|
STEP 4:
•LOOSELY assemble the MULTI PRESS FRAME (8) to the LEG PRESS FRAME (85) using eight RH CAPS (69), two 3/8 X 117mm BOLTS (104), two 3/8 X 67mm BOLTS (55), eight 3/8” SAE WASHERS (66), eight 3/8” RH WASHERS (67) and four 3/8” LOW HEIGHT LOCK NUTS (65) as shown in FIGURE 4. (NOTE: The two 3/8 X 117mm BOLTS (104) for this step are in the LEG PRESS hardware bag.)
•LOOSELY assemble the MULTI PRESS FRAME (8) to TOWER BASE (10) using four RH CAPS (69), two 3/8 X 90mm BOLTS (58), four 3/8” SAE WASHERS (66), four 3/8” RH WASHERS (67) and two 3/8” LOW HEIGHT LOCK NUTS (65) as shown in FIGURE 4.
9