FIGURE 36 | 109 |
| 3/8 X 67mm 101 |
| 106 |
| 107 |
| 86 |
| 85 |
| 105 |
STEP 36: |
|
•SECURELY assemble the HANDLE (86) to the LEG PRESS FRAME (85) using four RH CAPS (109), two 3/8 X 67mm BOLTS (101), four 3/8” SAE WASHERS (106), four 3/8” RH WASHERS (107) and two 3/8” LOW HEIGHT LOCK NUTS (105) as shown in FIGURE 36.
| 98 |
| 87 |
|
|
| 85 |
|
| 1” | 13” |
|
|
| |
88 |
|
|
|
109 |
|
|
|
105 |
|
|
|
106 | 107 |
|
|
FIGURE 37 |
|
| 3/8 X 117mm 104 |
STEP 37: |
|
|
|
•Assemble four 3/4 X 4” PIVOT SHAFTS (98) to the MAIN & SECONDARY PIVOT ARMS (87 & 88) as shown in FIGURE 37.
•SECURELY assemble the MAIN & SECONDARY PIVOT ARMS (87 & 88) to the LEG PRESS FRAME (85) using four RH CAPS (109), two 3/8 X 117mm BOLTS (104), four 3/8” SAE WASHERS (106), four 3/8” RH WASHERS (107) and two 3/8” LOW HEIGHT LOCK NUTS (105) as shown in FIGURE 37. (NOTE: Make sure the MAIN PIVOTARM is assembled as shown.)
33