109 107 | Life Fitness FIT 3 manual

91
85
	107
	106
103	3/8 X 73mm
109
FIGURE 40

STEP 40:

•SECURELY assemble theLEG PRESS SEAT PAD (91) to the LEG PRESS FRAME (85) using two RH CAPS (109), two 3/8 X 73mm BOLTS (103),two 3/8” SAE WASHERS (106) and two 3/8” RH WASHERS (107) as shown in FIGURE 40.

105		94
		85
			93
			100	3/8 X 50mm
87	96		109
FIGURE 41	107	106	109
FIGURE 41	107	106	101 3/8 X 67mm

STEP 41:

•Route the LEG PRESS CABLE (93) through the MAIN PIVOT ARM (87) and assemble one 4-1/2” PULLEY (94) to the MAIN PIVOT ARM (87) using two RH CAPS (109), one 3/8 X 67mm BOLT (101), two 3/8 X 1/2” FLANGE SPACERS (96), two 3/8” SAE WASHERS (106), two 3/8” RH WASHERS (107) and one 3/8” LOW HEIGHT LOCK NUT (105) as shown in FIGURE 41.

•Route the LEG PRESS CABLE (93) between the upper bracket and through the tube on the LEG PRESS FRAME (85) and assemble one 4-1/2” PULLEY (94) to the FRAME (85) using two RH CAPS (109), one 3/8 X 50mm BOLT (100), two 3/8” SAE WASHERS (106), two 3/8” RH WASHERS (107) and one 3/8” LOW HEIGHT LOCK NUT (105) as shown in FIGURE 41.

•Route the LEG PRESS CABLE (93) between the lower BRACKETS on the LEG PRESS FRAME (85) and assemble one 4-1/2” PULLEY (94) to the FRAME (85) using two RH CAPS (109), one 3/8 X 50mm BOLT (100), two 3/8” SAE WASHERS (106), two 3/8” RH WASHERS (107) and one 3/8” LOW HEIGHT LOCK NUT (105) as shown in FIGURE 41.