Life Fitness FIT 3 manual Black

FIGURE 32		69
	26	66
		65
		67
		46
		11
	28
3/8 X 70mm	56
	68
	BLACK
		73
		38
		36

STEP 32:

•Route the MULTI PRESS CABLE (73) through the LAT/LOW BOOM (11) and assemble one 4-1/2” PULLEY (26) to the BOOM

(11)using one BLACK RH CAP (68), one RH CAP (69), one 3/8 X 70mm BOLT (56), two 3/8” SAE WASHERS (66), two 3/8” RH WASHERS (67), one 2-7/8” X 2-1/4” CABLE CLIP (28), two 3/8 X 1/2” FLANGE SPACERS (46) and one 3/8” LOW HEIGHT LOCK NUT (65) as shown in FIGURE 32.

•Slide one WEIGHT STACK PIN (38) over the stem on the HEAD PLATE (36) as shown in FIGURE 32.

•Screw the threaded end of the MULTI PRESS CABLE (73) all the way onto the end of the stem on the HEAD PLATE (36) and tighten jam nut securely. See FIGURE 32.

0	1/2		1	1/2	2		1/2	3	1/2	4		1/2	5	1/2	6
	10	20	30	40	50	60	70	80	90	100	110	120	130	140	150

29