Life Fitness FIT 3 manual X 164mm

Page 20

65

 

 

12

 

 

14

 

 

 

67 66

 

 

3/8 X 164mm 61

69

45

 

 

35

40 FIGURE 19

 

STEP 19:

•SECURELY assemble the KNEE HOLD DOWN (12) to the LAT/LOW FRAME (14) using two RH CAPS (69), one 3/8 X 164mm BOLT (61), two 3/8” SAE WASHERS (66), two 3/8” RH WASHERS (67) and one 3/8” LOW HEIGHT LOCK NUT (65) as shown in FIGURE 19.

•Assemble two ROLLER PADS (45) and four 2-3/8” OD PLASTIC WASHERS (35) to the KNEE HOLD DOWN (12) using two 1-1/4” SHAFT COLLARS (40) as shown in FIGURE 19.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents FIT Series FIT-3 LEG Press Main Unit Parts List LEG Press Parts List Height Lock NUT SAE Washer 22 1/2 X 3 Shoulder Bolt Flange Spacer Step 104 3/8 X 117mm Remove CAP Before Assembly 55 3/8 X 67mm Step 100 110 120 130 140 150 Tighten Lubrication Note Step X 50mm Shaft to rotate freely Step 56 3/8 X 70mm 51 3/8 X 43mm X 164mm Spring PIN X 164mm X 106mm Button Head Cable to the second set of holes Loctite X 70mm X 67mm 54 3/8 X 61mm 51 3/8 X 43mm Step Black 49 3/8 X 25mm X 90mm RH Washers 107, one 2-7/8 X 2-1/4 Cable 100 110 120 130 140 150 X 67mm 105 107 X 117mm 109 109 107 109 105 107 106 Step Step Step Adjustment Serial # Warranty Information
Top Page Image Contents