Life Fitness FIT 3 manual 109 105 107 106

109		85
	105
		97
		107
	93	106
	104	3/8 X 117mm
FIGURE 42		87

STEP 42:

•Assemble the swivel end of the LEG PRESS CABLE (93) to the LEG PRESS FRAME (85) using two RH CAPS (109), one 3/8 X 117mm BOLT (104), two 3/8 X 1-1/2” FLANGE SPACERS (97), two 3/8” SAE WASHERS (106), two 3/8” RH WASHERS (107) and one 3/8” LOW HEIGHT LOCK NUT (105) as shown in FIGURE 42.

		109
85		99 3/8 X 43mm
		93
94	106	107
		105
FIGURE 43
STEP 43:

•Route the LEG PRESS CABLE (93) through the bracket on the LEG PRESS FRAME (85) and assemble one 4-1/2” PULLEY

(94)to the bracket on the FRAME (85) using two RH CAPS (109), one 3/8 X 43mm BOLT (99), two 3/8” SAE WASHERS (106), two 3/8” RH WASHERS (107) and one 3/8” LOW HEIGHT LOCK NUT (105) as shown in FIGURE 43.

0	1/2		1	1/2	2		1/2	3		1/2	4		1/2	5	1/2	6
	10	20	30	40	50	60		70	80	90	100	110	120	130	140	150

36