Life Fitness FIT 3 manual Button Head

						FIGURE 24				STEP 24:
										• SECURELY assemble the MULTI PRESS BACK PAD
											(43) to the BACK PAD SUPPORT (7) using two
											BLACK RH CAPS (68), two 3/8 X 73mm BOLTS (57),
											two 3/8” SAE WASHERS (66), two 3/8” RH WASHERS
							43				(67) as shown in FIGURE 24.
										• SECURELY assemble the MULTI PRESS SEAT PAD
											(70) to the SEAT PAD SUPPORT (3) using two
											BLACK RH CAPS (68), two 3/8 X 32mm BOLTS (50),
	3/8 X 73mm 57			7							two 3/8” SAE WASHERS (66), two 3/8” RH WASHERS
											(67) as shown in FIGURE 24.
	68	66	67
	BLACK
									70
									3
		3/8 X 32mm 50
STEP 25:													37 25
•	Slide two 3” ACCORIDIAN SLEEVES
											BLACK 64
	(31) over the shafts on the PIVOT ARM
	(5) as shown in FIGURE 25.
•	Slide two PILLOW BLOCKS (25) over										31
	the shafts on the PIVOT ARM (5) as
	shown in FIGURE 25.
• Assemble four 3/8 X 76mm BUTTON													63	3/8 X 76mm
	HEAD BOLTS (63), four 3/8” BLACK
														BUTTON HEAD
	SAE WASHERS (64) and four PILLOW
	BLOCK SPACERS (37) to the the
	PILLOW BLOCKS (25) as shown in														5
	FIGURE25.
						FIGURE 25
	0		1/2	1	1/2	2	1/2		3	1/2	4		1/2	5	1/2	6
		10	20	30	40	50	60	70	80	90	100	110	120	130	140	150
									23