C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 9 | Route the cable. | 2 |
| 1 | |
| Right upright |
|
| support |
|
| Display cable |
|
| Base frame |
|
| Base mounting |
|
| bracket | 3 |
|
| |
| Right upright |
|
| support |
|
| Bracket hole |
|
| Lower board |
|
b.Route the display cable through the right upright support. Ask an assistant to hold the upright support close to the right side mounting bracket. Route the cable through the upright support (see Diagram 9, #1) and pull it out of the large hole on the side of the support near its base. Diagram 9, #2.
Note: If you encounter difficulties with the cable, try tying a string to the end of the cable. Attach a washer to the opposite end for weight and route it through the upright support.
c.Ask your assistant to position the right upright support inside the base mount- ing bracket and align the mounting holes as you pull the cable through the mounting bracket hole in the base frame. See Diagram 9, #3.
Diagram 10 | Connect the |
| cable. |
| Cable connector |
| Lower board |
| Display cable |
d. Plug the cable connector into its receptacle on the lower board near the motor. See Diagram 10. A definite “click” is heard when the cable is properly attached. If you do not hear and feel the connector snap into place, reinsert it.
page 15