C O M M E R C I A L P R O D U C T S D I V I S I O N
KEYS ON THE DISPLAY CONSOLE
The Precor treadmills have an
Each key on the keypad provides specific functions. Numeric keys (numbered 1 - 0) let you enter data in answer to the display prompts and change the speed or incline during a workout. The standard keys, CHANGE, RESET, INCLINE ▲▼, SPEED ▼▲, and ENTER, let you enter data as well as control your workout.
The following information explains the different uses of the keys from left to right. To locate each key, look at the display console or refer to Diagram 22.
Diagram 22 Display console keypad.
QUICKSTART: Bypasses the remaining setup prompts and starts moving the running belt. SmartRate is inactive and default values apply.
Numeric keys: Indicate program #, time limit, or goal entries. During a workout, use these keys to select a target speed or incline.
Note: The CHANGE keys are not shown in this diagram. Refer to Diagram 22 for its location.
KEYPAD TIPS
•Select accurate entries or features such as SmartRate will not work properly.
•Answer the setup prompts by pressing the numeric keys or the ▼ or ▲ keys.
•Press ENTER to select the information being displayed.
•QUICKSTART bypasses further selections and causes the running belt to start moving. Default values apply (see QUICKSTART on page 34). The SmartRate display does not appear.
•A
•Press RESET to return to the Precor banner.
•The STOP button does not appear in Diagram 22, but its function is vital as explained in this section.
page 32