JVC RX-9010VBK Canceling the Sub-room Operations, To turn off the power into standby mode, press

SUB ROOM CONTROL

SUB ROOM ON /OFF

From the remote control:

1.Set MAIN ROOM/SUB ROOM selector to “SUB ROOM.”

MAIN ROOM SUB ROOM

Now the buttons on the remote control work for the sub-room operations.

2. Press AUDIO POWER ON.

STANDBY ON

The STANDBY lamp on the front panel goes off, and the SUB ROOM indicator lights up on the display (and the SPEAKERS SUB ROOM indicator also lights up on the display if it has been activated).

•The display does not show the indication for the sub-room operations, but you can operate the sub-room.

•If the SPEAKERS SUB ROOM indicator is not lit on the display, see “Activating the Sub-room Front Speakers” on page 26.

To turn off the power (into standby mode), press

AUDIO POWER STANDBY.

STANDBY ON

The STANDBY lamp lights red.

Note:

If you have turned off the receiver with the volume level set at more than level “40,” the volume level will be automatically set at level “40” next time you turn on the receiver.

Canceling the Sub-room Operations

On the front panel:

To stop the sub-room operations and sounds SUB ROOM ON /OFF from the sub-room speakers, press

SUB ROOM ON/OFF.

The SUB ROOM indicator on the display goes off, and the SPEAKERS SUB ROOM indicator on the display also goes off (no sound will be heard in the sub-room).

•You cannot use this receiver for the sub-room operations any more.

To use this receiver for the sub-room operations again 1. Press SUB ROOM ON/OFF.

The SUB ROOM indicator lights up on the display, and the SPEAKERS SUB ROOM indicator also lights up on the display if it has been activated.

2. Press SUB ROOM CONTROL.

The name of the current source for the sub- room appears on the display.

From the remote control:

To stop the sub-room operations and sounds from the sub-room

speakers, press SUB ROOM ON/OFF.

MAIN ROOM SUB ROOM

The SUB ROOM indicator on the display ON/OFF ON/OFF goes off, and the SPEAKERS SUB ROOM

indicator on the display also goes off (no sound will be heard in the sub-room).

To use this receiver for the sub-room operations again, press SUB ROOM ON/OFF again.

The SUB ROOM indicator lights up on the display, and the SPEAKERS SUB ROOM indicator also lights up on the display if it has been activated.

Notes:

•If you have turned off the sub-room sound with the volume level set at more than level “40, the volume level will be automatically set at level “40” next time you turn on the sub-room sound.

•If “TURN ON MAIN OR SUB ROOM” appears on the display, press MAIN ROOM ON/OFF or SUB ROOM ON/OFF to listen to the sound in the main room or in the sub-room; otherwise, the receiver will turn off after about 1 minute.

24