JVC RX-9010VBK manual Press Text Display while CD is selected as the source, Press SET again

Searching for a Disc (Only for the CD player)

Search for a disc by its performer:

1. Press TEXT DISPLAY while “CD” is selected as the source.

The Disc Information screen appears on the TV.

2. Press %/ Þto move to “SEARCH,” then press

SET.

The DISC SEARCH screen appears .

3. Press %/ Þto move to “PERFORMER,”

then press SET.

The PERFORMER SEARCH screen appears.

4. Press %/ Þ/ @/ #to
move in front of the
first character of the	￿
performer you want to

search for, then press SET.

To correct the incorrect entry, press %/ Þ/ @/ #to move

in front of the correct character, then press SET.

Note:

Symbols such as @, # or $ cannot be available for search.

5. Press SET again.

Disc search starts, then the

SEARCH RESULT screen, ￿

showing the performers, appears.

6.On the SEARCH RESULT screen, you can do the following:

•Changing the indication of the disc information:

Press % / Þ to move to a searched for disc, then press @/ #. Each time you press @/ #, the disc information alternates between its performer and its disc title.

•Starting a disc play and going to the Disc Information

screen (see page 58): Press % / Þ to move to a searched for disc, then press SET.

•Showing unseen disc information (if more than 5 discs are listed as a result of the search): Press %/ Þ until they appear.

•Going back to the PERFORMER SEARCH screen: Press EXIT.

Search for a disc by its disc title:

1. Press TEXT DISPLAY while “CD” is selected as the source.

The Disc Information screen appears on the TV.

2. Press %/ Þto move to “SEARCH,” then press

SET.

The DISC SEARCH screen appears.

3. Press %/ Þto move to “DISC TITLE,”

then press SET.

The DISC TITLE SEARCH screen appears.

4. Press %/ Þ / @/ #to
move	in front of the
first character of the
		￿
disc title you want to
search for, then press
SET.

To correct the incorrect entry, press %/ Þ/ @/ #to move

in front of the correct character, then press SET.

Note:

Symbols such as @, # or $ cannot be available for search.

5. Press SET again.

Disc search starts, then the

SEARCH RESULT screen, ￿

showing the disc titles, appears.

6.On the SEARCH RESULT screen, you can do the following:

•Changing the indication of the disc information:

Press % / Þ to move to a searched for disc, then press @ / #. Each time you press @/ #, the disc information alternates between its disc title and its performer.

•Starting a disc play and going to the Disc Information

screen (see page 58): Press %/ Þ to move to a searched for disc, then press SET.

•Showing unseen disc information (if more than 5 discs are listed as a result of the search): Press %/ Þuntil they appear.

•Going back to the DISC TITLE SEARCH screen: Press EXIT.

59