JVC RX-9010VBK Text Compu Link Remote Control System, CD player MD recorder, Disc Title Input

TEXT COMPU LINK Remote Control System

The TEXT COMPU LINK remote control system has been developed to deal with the disc information recorded in the CD Text* and MDs. Using this information in the discs, you can operate the CD player or MD recorder equipped with the TEXT COMPU LINK remote control system through the receiver.

The following operations are only possible while the receiver is ready for the main room operations, and are used for the main room sources.

CONNECTIONS:

To use this remote control system, you need to connect the CD player and/or MD recorder you want to operate, following the procedures below.

1.If you have already plugged your CD player, MD recorder, and this receiver into the AC outlets, unplug their AC power cords first.

2.Connect your CD player, MD recorder, and this receiver as follows, through the COMPU LINK jacks and TEXT COMPU LINK jacks.

1)COMPU LINK jacks: Use the cables with the monaural mini-plugs (not supplied with this receiver).

CD player

MD recorder

FUNCTIONS:

This remote control system allows you to use the functions listed below.

Displaying the Disc Information on the TV screen

Disc information such as its performer and disc title (and track titles only when a CD Text is selected) is shown on the TV screen.

Disc Search: Only for CD Player

This remote control system can allow you to search for discs by the performer, disc title, and music genre.

With this disc search, you can easily find the disc you want to play.

Disc Title Input:

If your CD player or MD recorder has the disc memory function, you can input the following information about the normal audio CDs or MDs on the TV screen.

•For CDs: Performer, disc title, and music genre

•For MDs: Disc title and song titles

*What is a CD Text?

In a CD Text, some information about the disc (its disc title, performer, composer, arranger, etc.) is recorded.

COMPU LINK – 4

(SYNCHRO)

2)TEXT COMPU LINK jacks: Use the cables with the stereo mini-plugs (not supplied with this receiver).

CD player

MD recorder

TEXT

COMPU LINK

Notes:

•If your audio component has two COMPU LINK jacks, you can use either one. If it has only one COMPU LINK jack, connect it so that it is the last item in the series of components. (For example, the CD player in the diagram in the left column.)

•If your audio component has two TEXT COMPU LINK jacks, you can use either one. If it has only one TEXT COMPU LINK jack, connect it so that it is the last item in the series of components. (For example, the CD player in the diagram in the left column.)

•“TEXT COMPULINK SOURCE NOT CONNECTED” appears on the display in the following cases:

–When the connections explained on the left are not correctly done.

–When you try to use the TEXT COMPULINK function a few seconds after you turn on the connected equipment. This is not a malfunction of the units.

•Refer also to the manuals supplied with your CD player or MD recorder.

3.Connect your CD player, MD recorder and this receiver, using the cables with RCA pin plugs (see pages 7 and 8).

4.Plug the AC power cords of these components above into the AC outlets.

5.When turning on these components for the first time, turn on the connected components first, then turn on this receiver.

IMPORTANT:

If you turn on the receiver before turning on the other components after connecting the components, the TEXT COMPU LINK remote control system does not work correctly.

If this happens:

1.Turn off all the components including this receiver.

2.Turn on the connected components.

3.Turn on this receiver.

57