JVC RX-9010VBK manual Press Text Display while CD or MD is selected as the source

OPERATIONS:

To use this remote control system, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 9), and set the TV’s input mode to the proper position to which the receiver is connected. Make sure you have connected the CD player or

MD recorder equipped with the TEXT COMPU LINK remote control system. If not, you cannot use the following functions.

IMPORTANT:

Check to see if the proper indicator(s) and information appear on the display on the front panel before/while using the buttons and controls.

For the main room operations:

•The MAIN ROOM indicator is lit.

•The source name for the sub-room is not lit on the display.

• When using the remote control:

– Set MAIN ROOM/SUB ROOM selector to

“MAIN ROOM.”

MAIN ROOM SUB ROOM

–Check to see if the following information

appear on the display window on the remote control.

On-Screen Operation buttons (on the remote control)

TV/VIDEO

TV VOL CHANNEL	VOLUME	MENU	TEXT
MUTING
			DISPLAY
MENU	TEXT
	DISPLAY
SET			SET

DVD

EXIT

MENU

DVD

EXIT

MENU

RM-SRX9010JREMOTE CONTROL

A/V CONTROL RECEIVER

“MENU” appears on the display window of the remote control

when you press the buttons — TEXT DISPLAY,		% / Þ/ @/
#, SET, EXIT.
Ex. When you press TEXT DISPLAY,				STANDBY	ON
	MAIN ROOM SUB ROOM TV/CATV/DBS				VCR1
	MAIN ROOM SUB ROOM
“MENU” appears on the display	ON/OFF		ON/OFF POWER		POWER
window.	MAIN ROOM SUB ROOM

Disc Information screen

1

	6
2	7
	￿
3	8
4
5	9

1Source name: CD or MD

2Select or , then press SET to change the disc.

3 Track numbers and track titles.

•When you move to a track number, you can change the track information by pressing @/ #. Each time you press the button, track information alternates between its track title and its performer. (You can also

start playing the track by pressing SET.)

4Select this (move in front), then press SET to go to the DISC SEARCH screen (see page 59).

5Select this (move in front), then press SET to go to

the TITLE INPUT screen (see page 60).

6This appears only when a CD Text is selected.

7Disc information such as the disc title, performer, and music genre.

When this is selected ( in front), you can change the disc information by pressing @/ #. Each time you press

the button, disc information (see “Note on 7”) changes.

8Select or , then press SET to change the track.

9 Usable buttons and their functions for the current selection.

Indication here will be changed according to what is

currently selected ( in front) on the screen. See “Note on 9.”

Note on 7:

The following information will appear on the display:

•For CD Texts — Disc title, Performer, Genre, Song writer, Composer, Arranger, Message

Only recorded information will be shown. If there is no data, “NO DATA” will appear.

•For MDs — Disc title

If there is no data, “NO DATA” will appear.

Showing the Disc Information on the TV Screen

Press TEXT DISPLAY while “CD” or “MD” is selected as the source.

The Disc Information screen appears on the TV.

Note on 9:

For example, the SET button will be used to start play (PLAY), to go to the next screen (ENTER), and to determine the selection (ENTER).

To exit from the Disc information screen:

Press EXIT.

Notes:

•The on-screen display will disappear in the following cases:

–if no operation is done for about 10 minutes.

–if you do any operation other than explained in this section.

•To control the MD recorder using the TEXT COMPU LINK remote control system, you have to change the source name shown on the display from “TAPE” to “MD.” (See page 33.)

•Some special characters and marks cannot be displayed correctly.

58