JVC RX-9010VBK manual Adjusting the Subwoofer Output Level, Setting the Subwoofer Information

Page 31

From the remote control:

SOUND

1. Press SOUND.

The 10 keys are activated for sound adjustments.

2.Press BALANCE R or BALANCE L to adjust the balance.

• Pressing BALANCE R decreases the left

L—BALANCE—R

1

2

 

channel output (from R –21 to CENTER,

from CENTER to L –21).

• Pressing BALANCE L decreases the right

channel output (from L –21 to CENTER, from CENTER to R –21).

Adjusting the Subwoofer Output Level

You can adjust the subwoofer output level if you have selected “YES” for the “SUBWOOFER” (see to the left).

• You can do this setting for each source.

Before you start, remember....

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

When the front speakers are all deactivated, the subwoofer level cannot be adjusted.

Note:

This function is applied only to the main room sources.

Setting the Subwoofer Information

Register whether you have connected a subwoofer or not.

Before you start, remember....

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel:

1.Press LEVEL ADJUST repeatedly until “SUBWFR” appears on the

display.

The display changes to show the current setting.

2.Press CONTROL UP 5/DOWN ° to adjust the subwoofer output level (from –20 dB to +10 dB).

LEVEL

ADJUST

CONTROL

DOWN UP

On the front panel ONLY:

1.

Press SETTING repeatedly until

 

SETTING

 

 

 

“SUBWOOFER” appears on the

 

 

 

 

 

 

display.

 

 

 

The display changes to show the current setting.

 

 

2.

Press CONTROL UP 5/DOWN °

CONTROL

DOWN UP

to select “YES” or “NO.”

Each time you press the button, the display alternates between “YES” and “NO.”

YES: Select this when a subwoofer is connected.

NO: Select this when no subwoofer is used.

Note:

You cannot use SUBWOOFER OUT ON/OFF on the front panel (see page 21) and adjust the subwoofer output level (see to the right) when “SUBWOOFER” is set to “NO.”

From the remote control:

1.

Press SOUND.

SOUND

 

 

The 10 keys are activated for sound

 

 

adjustments.

 

2.

Press SUBWFR.

SUBWFR

 

 

 

 

5

3.Press LEVEL + or LEVEL – to adjust the subwoofer output level from –20 dB to + 10 dB.

• Each time you press the button, “S WFR”

LEVEL+

appears on the display on the remote control.

LEVEL–

28

Image 31
Contents RX-9010VBK Mises en garde, précautions et indications diverses For Canada/pour Le Canada Table of Contents Introduction Features PrecautionsAUDIO, FM/AM Parts IdentificationFront Panel DVD MULTI, DVD, VCR 1, VCR 2, VideoTV/CATV/DBS POWER, VCR 1 Power 67 Remote ControlGetting Started Before InstallationChecking the Supplied Accessories Connecting the FM and AM AntennasAM Antenna Connections Connecting the SpeakersBasic connecting procedure Connecting the front speakersAnalog Connections Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVCRs Cassette deck or MD recorderCD recorder Output SOUND/DBS, do not connect the TV’s videoOutput to these video input jacks To audioDigital input terminals Digital ConnectionsDigital output terminal USB cable Change the PC audio settingUSB Connection Lamp on the USB Audio button lights upInsert the RF rod antenna to the RF Remote Antenna terminal Find the place where you attach the IR signal transmitterRotate the fixing nut to attach the RF rod antenna firmly Replace the cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletDemerits Multi-room OperationsRequired Speaker Connections for the Sub-room MeritsSelect and play a source Basic Operating Procedure for Main RoomPress Power Press Audio Power onSet Main ROOM/SUB Room selector to SUB Room Basic Operating Procedure for Sub-RoomStandby lamp on the front panel Main Room Basic Operations Turning the Power On and Off StandbyFor the main room operations To stop the main room operations and sounds from the main Canceling the Main Room OperationsSelecting the Main Room Source to Play Selecting different sources for picture and soundSignal indicators Adjusting the Main Room VolumeSpeaker and signal indicators on the display Speaker indicatorsAdjusting the Equalization Patterns Muting the Main Room Sound Listening at Night Midnight Mode Reinforcing the BassAttenuating the Input Signal Activating the Subwoofer SoundChanging the Display Brightness Selecting the Line Direct Function Using the Sleep TimerRecording a Source For the sub-room operations Sub-Room OperationsPress SUB Room ON/OFF. SUB Room on /OFF Press SUB Room CONTROL. SUB Room ControlSUB Room ON/OFF Canceling the Sub-room OperationsTo turn off the power into standby mode, press Audio Power StandbyTo increase the volume, press Volume + Adjusting the Sub-room VolumeTo increase the volume, turn Master To decrease the volume, turn it counterclockwiseOperating the Playback Source for Sub-room Activating the Sub-room Front SpeakersMuting the Sub-room Sound Through the front speaker in the sub RoomTo adjust the balance Basic SettingsSetting the Front Speakers Either for Main Room or Sub-room Adjusting the Front Speaker Output BalanceSetting the Subwoofer Information Adjusting the Subwoofer Output LevelSetting the Speakers for a Surround Field Press Control UP 5/ Down Control Digital Input Digital in Terminal SettingTo select the appropriate digital Terminal setting Cross Over appears on DisplayTo set the Digital 2/3/4 terminals Terminal settingsSelecting the Analog or Digital Input Mode Which you want to change the input modeVideo DVD or Video DBS Appears on the display Selecting the Video Input TerminalTo select the appropriate video Input terminal Showing the Text Information on Display Changing the Source NameTo cancel the One Touch Operation Basic Setting and Adjustment Auto MemoryTo store the volume level To recall the volume levelTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Surround modes Creating a Surround Field in the Main RoomDSP modes 3D-PHONIC modes DVD Multi Playback ModeHeadphone DSP mode Reproducing the Sound FieldLive Club \ Dance Club \ Pavilion Available DSP Modes According to the Speaker ArrangementAvailable DSP modes Theater \ TheaterAdjusting the Surround Modes CTR Tone 1 CTR Tone 2 CTR Tone Adjust the center toneAdjusting the DAP Modes Press Center Tone to select the center tone level you wantAdjust the room size sense of spaciousness Adjust the overall levels of the effect. EffectDance CLUB, or Pavilion appears on the display Adjusting the Surround Modes with DAP Modes Press Surround ON/OFF to Activate an appropriate Surround Adjust the speaker output levels 10 dB to +10 dBPress DSP Mode repeatedly until DAP mode you want to adjust Press Effect to adjust the overallActivate an appropriate Surround Adjust the center tone for 5CH Stereo only Adjust the livenessPress DSP Mode repeatedly until Adjusting the 5 CH/4 CH Stereo ModeCenter CTR Rearl Rearr Adjusting the 3D-PHONIC ModesCenter tone level you want for 5CH +10 Stereo onlyPress Center to select the center speaker 3D Action or 3D DigitalPress DVD Multi so that DVD Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Adjust the speaker output levels From -10 dB to +10 dBUsing the On-Screen Menus Want Press %/ Þto move to the frequency you want to adjustPress %/ Þto move to Sound CONTROL, then press @/ # Press @/ #Select DVD Multi as the playing source Mode you want toPress %/ Þto move to On or OFF To Line DirectPress @/ #to turn Line direct functionPress %/ Þto move to Tuner CONTROL, then press @/ # Press %/ Þto move to SETTING, then press @/ #Storing the Preset Stations Also see Setting the Basic Setting ItemsTurntable Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver RX-9010VBKPress the play 3 button on the CD player Same timeSynchronized Recording Disc Search Only for CD Player Text Compu Link Remote Control SystemCD player MD recorder Displaying the Disc Information on the TV screenTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceDisc Information screen Showing the Disc Information on the TV ScreenPress SET again Press Text Display while CD is selected as the sourcePress %/ Þto move to SEARCH, then press Press %/ Þto move to Performer Then press SETEntering the Disc Information Press %/ Þto move to SEARCH, then press SETPress %/ Þto move To GENRE, then Press SET Press %/ Þto move To Title INPUT, then press SETFor the MD recorder Press %/ Þto move to the genre you want, then press SETPress Text Display while MD is selected as the source Press %/ Þto move to Title Input Then press SETConnections 2 AV Comp Link Connection AV Compu Link Remote Control SystemConnections 1 IR Signal Transmitter Connection IR signal transmitterOne-Touch Video Play To the TVs’ Video Input 1 terminal using S-video cablesConnections 3 Video Cable Connection CaseAutomatic Power On Automatic Power On/Off StandbyOne-Touch DVD Play Sound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCassette deck CD player-changerCD recorder TurntableVCR VCR connected to the VCR 1 jacks Operating Video ComponentsTV/CATV/DBS selector Main ROOM/SUB Room selectorTry to operate your TV by pressing Enter manufacturer’s code using buttons 1-9,Release TV/CATV/DBS Power Operating Other Manufacturers’ EquipmentIf there are more than one code listed for your brand Release VCR 1 PowerTry to operate your VCR by pressing VCR 1 Power VCR 1 PowerManufactures codes for DBS tuner Manufacturer Codes Release Audio Power onIf there are more than one code listed for your brand of CD Manufactures codes for TV Manufacturer CodesManufactures codes for CD player Manufacturer Codes Manufactures codes for Catv converter Manufacturer CodesManufactures codes for VCR Manufacturer Codes Manufactures codes for DVD player Manufacturer CodesProblem Possible Cause Solution TroubleshootingCATV/DBS AM tuner SpecificationsAmplifier FM tuner IHFValley Road Wayne, NJ QualityserviceFactory Service Center Locations 781 954 650Limited Warranty AUDIO-2 0201NHMMDWJEIN