JVC RX-9010VBK Available DSP Modes According to the Speaker Arrangement, Available DSP modes

Available DSP Modes According to the Speaker Arrangement

Available DSP modes will vary depending on how many speakers are used with this receiver.

Make sure that you have set the speaker information correctly (see page 29).

Speaker arrangements							Available DSP modes
				Each time you press DSP MODE, the DSP modes change as follows:
Front	TV	Front		THEATER 1		\ THEATER 2		\ HALL 1	\ HALL 2 \
			LIVE CLUB			\ DANCE CLUB		\ PAVILION	\
speaker	Center	speaker
			5 CH STEREO (when using 5 speakers) or 4 CH STEREO (when using 4 speakers)* \
	speaker
			3D ACTION or 3D DIGITAL					\ SURR. OFF (DSP OFF) \
			(Back to the beginning)
Rear		Rear
					To activate the Surround mode, press SURROUND ON/OFF button so that the
speaker		speaker
					SURROUND ON/OFF lamp on the front panel button lights up.
Front	TV	Front
speaker		speaker
				Notes:

•If the settings for the center and the rear speakers are changed to “NONE” (see page 29), the Surround mode will be canceled.

•When both of the Surround mode and DSP mode are deactivated, “SURR. OFF” appears

Rear	Rear	on the display.
speaker	speaker	* “5CH STEREO” is selected when setting the center speaker to “LARGE” or “SMALL,” and
		“4CH STEREO” is selected when setting the center speaker to “NONE” (see page 29).

			THEATER 1		\ THEATER 2	\ HALL 1	\ HALL 2 \
Front	TV	Front	LIVE CLUB		\ DANCE CLUB	\ PAVILION	\
speaker	Center	speaker	3D ACTION or 3D DIGITAL			\ SURR. OFF (DSP OFF) \
			(Back to the beginning)
	speaker
				To activate the Surround mode, press SURROUND ON/OFF button so that the
				SURROUND ON/OFF lamp on the front panel button lights up.

Notes:

•If the setting for the center speaker is changed to “NONE” (see page 29), the Surround mode will be canceled.

•When both of the Surround mode and DSP mode are deactivated, “SURR. OFF” appears on the display.

Front	TV	Front	THEATER 1	\ THEATER 2	\ HALL 1	\ HALL 2 \
			LIVE CLUB	\ DANCE CLUB	\ PAVILION	\
speaker		speaker
			3D ACTION or 3D DIGITAL		\ SURR. OFF (DSP OFF) \
			(Back to the beginning)

Note:

Surround mode cannot be used when only the front speakers are connected.

TV HEADPHONE j HEADPHONE DSP

Note:

To use the HEADPHONE or HEADPHONE DSP mode, deactivate both of the front speakers (see page 19).

When the SUB ROOM and SPEAKERS SUB ROOM indicators are lit on the front panel

You can only use 3D-PHONIC modes for the main room source, without respect to the center/rear speaker connection.

39