Siemens WFXD5202UC manual Fault Possible cause, Action

Fault Possible cause Action

Washing solution has not Suds or pump is blocked.

drained	completely.
Indicator	light rinse•		" is
lit and	display is		flashing
•E:04".
Water is flowing out fro				The	thread	of the supply hose is not tight.
underneath		the machine.
				Leak in the drain hose.
Suds coming out of the				Too	much	soap or non-HE soap used, pump
detergent		dispenser.		not	remove	suds.

Use less detergent for future wash loads. Detergents specifically designed for your High Efficiency washer produce fewer suds and will include the letters •HE" on the packaging. Clean the water drainage pipe and/or drain hose. Turn the program selectoroff" to • and restart theprogram.

Tighten		the thread.
Replace		the	drain	hose.
Mix	1	tablespoon		of fabric softener with½ 1litre)pt (
of	water and		pour	into detergent dispenserIII.

Use less detergent for future wash loads.

Detergents

specifically designed for you High Efficientcy washer

produce fewer

suds and will

include the

letters •HE"

on the

packaging.

Repeated

spinning.

This

is not

a

fault.

Always

load

the

drum

with

andlarge small

items

The imbalance compensation system is attempting together.

balance the load through repeated

spins.

The laundry

was

not

Large items

of

clothing

have become

entangled andAlways

load

the

drum

with

andlarge small

items

spun.

could

not be distributed

evenly in

the

drum.

For togethersafe\.

ty reasons the high]speed spin cycle

was

automati\

cally

suppressed.

Program

duration

ex\

This

is not

a

fault.

Add a more appropriate amount of detergent.

tended.

The

suds detection feature has activated

an

addi\

tional

rinsing cycle to reduce the

amount

of

suds.

This is not a fault.

Always

load

the

drum

with

andlarge small

items

The imbalance compensation system is attempting together.

balance the load through repeated spins.

Unsatisfactory

washing

The

degree

of

soiling was higher

than

estimated. Select

suitable

program

result.

or

heavy

soil as

an additional

option.

Not enough

detergent.

Add detergent according to the manufacturer's

specifications.

Detergent residue on the Some phosphate\free detergents contain water\insol\Brush

off spots

when

laundry is dry.

laundry.

uble

residues that may appear as

light

spots

on the

laundry.

Gray residue

on the

laun\Dirt

accumulation

from ointments,

fats or

oils.

Add

the maximum amount of detergent and select

dry.

the

highest

permissible

temperature.

System

shakes or shudders Drum system suspension can shift during speed up,

thisMix

small and large laundry pieces in

load to minimize

when

passing

from lower tois not a failure.

this

effect.

higher

speed

spinning.

If the

fault

cannot

be

eliminated with

the aid of the

above

table,

switch the

appliance

off, wait 5

seconds, switch

again,

select

and start

the

program.

If the fault continues, call customer service; see Page 25.

24