Advantech INTRAC-305 user manual Goto Position

OPERATION INTRAC-305

GOTO (Position)

Current Mode				Tracking
Control State				Local
Beac Freq			11.452000 GHz
Beac Level		-10.05			dB
El	Angle	25.37
Az	Angle	210.50
Pol	Angle	27.4
El Angle
Az Angle
Pol Angle
Beac Freq					MHz

Press EN to go to position

Mode

Standby

Home

New

Mode

Search

Goto Satellite

Next

Field

1

2

3

4

5

6

puts the antenna control system into STANDBY mode and skips to the HOME menu

skips to the Home (root) menu

skips to the New Mode menu

skips to the Search menu

skips to the Goto Satellite menu

moves the highlight box to the next field in the current menu

Path	HOME - NEW MODE - MENU KEY 4
Note	Pressing menu key 4 (Goto) on the New Mode menu leads to
	the Goto Position (as opposed to Goto Satellite) menu. Goto
	Satellite and Search are accessed from this (Goto Position)
	menu by Menu Keys 5 and 4 respectively.
Description	Used to drive the antenna to the co-ordinates displayed.
	The co-ordinates can be set by using menu key 6 (Next Field)
	to step through the three angles and the Beacon Frequency.
	The co-ordinate enclosed in the box can be edited from the
	numeric keypad. The ← & → keys are used to move the
	cursor to the desired character.
	Pressing the ENTER key causes the antenna to commence
	driving to the set co-ordinates. When the antenna reaches
	the position the INTRAC enters STANDBY Mode.

Page 16 INTRAC-305 MANUAL - Issue 3.2 ©2011 Advantech Wireless