Advantech INTRAC-305 user manual Reserve Model, Home Function Models

OPERATION INTRAC-305

RESERVE MODEL

Current Mode		Tracking
Control State		Local
Beac Freq		11.452000 GHz
Beac Level		-10.05	dB
El	Angle	25.37o
Az	Angle	210.50o
Pol	Angle	27.4 o

>IESS-412	SET	SET	<
NORAD	NOT

Press EN to accept selection

Function

Standby

Home

Models

Config

System

Setup

Next

Field

1

2

3

4

5

6

puts the antenna control system into STANDBY mode and skips to the HOME menu

skips to the Home (root) menu

skips to the Models menu

skips to the Config menu

skips to the System Setup menu

moves the highlight box to the next field in the current menu

Path	HOME - FUNCTION - MODELS -
	MENU KEY 6 (x2) - ENTER
or	From Configuration or System Setup
	MODELS - MENU KEY 6 (x2) - ENTER
Description	Once the INTRAC-305 has built an orbit model it can track
	the satellite with no tracking signal for 72hrs. After this time if
	there is still no signal the INTRAC deems the model to be
	expired and ceases to track.
	In such a situation the INTRAC can fall back into Program
	Track mode using the “Reserve Model”.
	The “Reserve Model” requires that valid IESS-412 or NORAD
	data be loaded and that the required reserve model is
	selected.
	In this menu the required reserve model, IESS-412 or
	NORAD is set.
	Menu Key 6 (Next Field) steps through the two selections.
	Pressing ENTER accepts the highlighted selection.
Note	The words SET and NOT SET following IESS-412 and
	NORAD refer to the previous selection. Pressing ENTER will
	make the highlighted selection SET and the other NOT SET
	regardless of the current displayed state.

Page 40 INTRAC-305 MANUAL - Issue 3.2 ©2011 Advantech Wireless