Advantech INTRAC-305 user manual Operation, Beacon Threshold

3

INTRAC-305 OPERATION

BEACON THRESHOLD

Current Mode		Tracking
Control State		Local
Beac Freq		11.452000 GHz
Beac Level		-10.05		dB
El	Angle	25.37o
Az	Angle	210.50o
Pol	Angle	27.4	o

Set Level: -14.12 dB

Press EN to accept selection

Function

Standby

Home

Models

Config

System

Setup

1

2

3

4

5

6

puts the antenna control system into STANDBY mode and skips to the HOME menu

skips to the Home (root) menu

skips to the Models menu

skips to the Config menu

skips to the System Setup menu

(not used)

Path	HOME - FUNCTION - MENU KEY 6 (x8) - ENTER
or	From Models or System Setup
	CONFIG - MENU KEY 6 (x8) - ENTER
Description	On this screen the beacon signal strength at which the
	beacon level alarm trips is set.
	If the tracking signal level falls below the value set here the
	INTRAC-305 considers the tracking signal receiver to have
	lost lock on the beacon.
	Edit the value in the “Set Level” box using the numeric
	keypad. The ← & → move the cursor.
Note	The only function of the beacon level alarm is to operate a
	relay for external use. It is not used by the INTRAC algorithm
	and, when it occurs in isolation without an alarm from the
	IBR-L, has no effect on the INTRAC operation or mode.

© 2011 Advantech Wireless INTRAC-305 MANUAL - Issue 3.2 Page 27