Maytag MDE17MN Location Requirements, Product Dimensions 68.6 cm 27 dryer

Location Requirements Product Dimensions 68.6 cm (27") dryer

IMPORTANT: Observe all governing codes and ordinances.

■Check code requirements: Some codes limit or do not permit installation of clothes dryers in garages, closets, or sleeping quarters. Contact your local building inspector.

NOTE: The dryer must not be installed in an area where it will be exposed to water and/or weather.

Recessed Area and Closet Installation Instructions

68.6 cm (27")
ELECTRIC	35.6 cm
	(14")
BACK VIEW
33 cm	10.2 cm (4")
(13")
	dia.
	EXHAUST
74.3 cm (291/4")

67.3 cm (261/2")

94 cm

(37")

12.1cm

(43⁄4")

20 cm (77⁄8")

This dryer may be installed in a recessed area or closet.

This dryer must not be installed behind a lockable door, a sliding door, or a door with a hinge on the opposite side to that on the dryer.

The installation spacing is in cm and is the minimum allowable. Additional spacing should be considered for ease of installation, servicing, and compliance with local codes and ordinances.

If closet door is installed, the minimum unobstructed air opening in the top and bottom is required. Louvered doors

with equivalent air openings are acceptable.

The dryer must be exhausted outdoors.

No other fuel-burning appliance may be installed in the same closet as the dryer.

Minimum Installation Clearances

			35.6 cm
			(14") max.				310 cm2
38.1 cm			Closet				(48 in2.)*
(15")*
			door				Front
					0 cm		View
				(0")
0 cm (0")		0 cm (0")					155 cm2
							(24 in2.)*
						2.5 cm (1")
	Recessed front view			Closet side view

Additional clearances for wall, door, and floor moldings may be required or if external exhaust elbow is used.

SIDE VIEW

88.9cm

(35")

2.5cm

(1")

	7.6 cm (3")
closet	*Opening is the minimum for a
	closet door.
door	Louvered doors with equivalent air
	openings are acceptable.
	7.6 cm (3")

4