Quick Installation Guide
Rosemount 3095 MultiVariable
STEP 5: CONFIGURE THE TRANSMITTER (FIELDBUS)
Each FOUNDATION fieldbus host or configuration tool has a different way of displaying and performing configurations. Some use Device Descriptions (DD) or DD methods for configuration and to display data consistently across platforms. There is no requirement that a host or configuration tool support these features.
Use the following block examples to do basic configuration to the transmitter. For more advanced configurations including configuring the 3095 Mass Flow transducer block, see the 3095 Manual
NOTE
DeltaV users should use DeltaV Explorer for the Resource and Transducer blocks and Control Studio for the Function Blocks.
Send the Configuration to the Transmitter
Use the following steps to create and send the mass flow configuration to the Mass Flow Transducer Block.
NOTE
All previous Mass Flow transducer block information will be overwritten when the configuration is sent.
1.Open the 3095 Engineering Assistant for FOUNDATION fieldbus.
2.Select scan to scan the FOUNDATION fieldbus segment and select the device requiring the new or updated mass flow configuration file.
3.Select the EA Wizard.
4.Step through the Flow Configuration Wizard to create a mass flow configuration file.
5.Save the new or updated mass flow configuration file. Files must be saved for future review or update. Files cannot be uploaded from the Mass Flow Transducer Block.
6.Select send to send the mass flow configuration file to the selected transmitter Mass Flow Transducer Block.
To configure the AI Block
AI Block configuration parameters
|
|
|
|
|
| ||
Parameters | Enter Data |
|
|
|
| ||
Channel | 1 | = Pressure |
|
|
|
| |
| 2 | = Static Pressure |
|
|
|
| |
| 3 | = Process Temperature |
|
|
| ||
| 4 | = Device Temperature |
|
|
| ||
| 5 | = Mass Flow |
|
|
|
| |
L_Type | Direct, Indirect, or Square Root |
|
|
| |||
XD_Scale | Scale and Engineering Units |
|
|
| |||
(Note: Only select the units that are supported by the device.) |
|
|
| ||||
| Pressure: |
|
|
|
|
| |
| Pa | bar | inH20 @ 68°F |
| psi | inHg @ 0°C | |
| kPa | mbar | mmH20 @ 68°F | g/cm2 | mmHg @ 0°C | ||
| mPa | atm | ftH20 @ 68°F |
| kg/cm2 | mmH20 @ 4°C | |
| Temperature: |
|
| torr | inH20 @ 4°C | ||
|
|
|
|
| |||
| °C | °F | K |
|
|
| |
| Mass Flow Rate: |
|
|
|
| ||
| lbm/sec | lbm/min | lbm/hr | lbm/day | kg/sec |
| |
| kg/min | kg/hour | g/sec | g/min | g/hr |
| |
| StdCuFt/sec | StdCuFt/min |
|
|
| ||
| StdCuFt/hr |
| StdCuFt/day |
| StdCuM/sec |
| |
| StdCuM/min | StdCuM/hr |
| StdCuM/day |
| ||
Out_Scale | Scale and Engineering Units |
|
|
| |||
16