Emerson manual Explosions could result in death or serious injury, Rosemount 3095 MultiVariable

Quick Installation Guide

Rosemount 3095 MultiVariable

00825-0100-4716, Rev DA October 2009

© 2009 Rosemount Inc. All rights reserved. All marks property of owner. Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.

Rosemount Inc.	Emerson Process Management GmbH & Co. OHG
8200 Market Boulevard	Argelsrieder Feld 3
Chanhassen, MN USA 55317	82234 Wessling
T (US) (800) 999-9307, F (952) 949-7001	Germany
T (International) (952) 906-8888	T 49 (8153) 9390, F49 (8153) 939172

Emerson Process Management Asia Pacific	Beijing Rosemount Far East Instrument Co.,
Private Limited	Limited
1 Pandan Crescent	No. 6 North Street,
Singapore 128461	Hepingli, Dong Cheng District
T (65) 6777 8211, F (65) 6777 0947	Beijing 100013, China
	T (86) (10) 6428 2233, F (86) (10) 6422 8586

IMPORTANT NOTICE

This installation guide provides basic guidelines for the Rosemount 3095 MultiVariable Mass Flow Transmitter (reference manual document number 00809-0100-4716). It also provides the basic electronics guidelines for the 3095MFA (reference manual document number 00809-0100-4809), the 3095MFC (reference manual document number 00809-0100-4810) and the 3095MFP (reference manual document number

00809-0100-4686). It does not provide instructions for configuration, diagnostics, maintenance, service, or troubleshooting. Refer to the appropriate reference manual for more instruction. These manuals are also available electronically on www.rosemount.com.

WARNING

Explosions could result in death or serious injury:

Installation of this transmitter in an explosive environment must be in accordance with the appropriate local, national, and international standards, codes, and practices.

•Before connecting a HART-based communicator in an explosive atmosphere, make sure the instruments in the loop are installed in accordance with intrinsically safe or non-incendive field wiring practices.

•In an Explosion-Proof/Flame-Proof installation, do not remove the transmitter covers when power is applied to the unit.

•Do not remove the transmitter covers in explosive environments when circuit is live.

•Both transmitter covers must be fully engaged to meet explosion-proof requirements.

Process leaks may cause harm or result in death.

•To avoid process leaks, only use the o-ring designed to seal with the corresponding flange adapter.

Electrical shock can result in death or serious injury.

•Avoid contact with the leads and the terminals. High voltage that may be present on leads can cause electrical shock.

2