Belkin 8000I Preface, Important Safety Information, Please read carefully before use

Page 2

1

Preface

 

 

In this chapter

 

 

Important Safety Information

2

 

Disclaimer

4

 

Warranty

4

1.1Important Safety Information

IMPORTANT SAFETY INFORMATION

Please read carefully before use

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety measures that follow this symbol to avoid possible injury or death.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

It is your sole responsibility to use the Northstar 8000i in a manner that will not cause accidents, personal injury or property damage. Always observe safe boating practices.

When navigating the vessel, use the Northstar 8000i only as a navigational aid. Proper

navigation of the vessel is the sole responsibility of the vessel operator.

Depth soundings should be used only for navigation. Never use a depth sounding to gauge

depth, range or other conditions for swimming or diving.

The Global Positioning System (GPS) is operated by the US Government which is solely responsible for its operation, accuracy, and maintenance. The GPS system is subject to changes which could affect the accuracy and performance of all GPS equipment anywhere in the world.

2

Northstar 8000i System - 12" Display Processor Installation Manual

Image 2
Contents Northstar Please read carefully before use Important Safety InformationPreface Ft 0.5 m Warranty DisclaimerContents Example System Layouts Maintenance Introducing the Northstar 8000i System Check the 12 inch Display Processor partsChart License Key NS004820 Page Find your way around the 12 inch Display Processor PPIRGB Network Master Unit 8000i System Installation Installation Sequence Summary GuidelinesPlace in 8000i System Northstar 8000i 12 inch Display ProcessorDescription Optional PartsLocation Guide Power requirementsNorthstar 8000i Black Box Processor MountingNorthstar 8000i 15 inch Monitor Other parts required Functions Power requirements Voltage Fuse DrawNorthstar 8000i Network Radar Northstar 8000i 8 Port Network Linker Northstar 8000i 4 Port USB Hub Northstar 8000i 1 kW Network Sounder FunctionalityNorthstar 8000i DVD-CD Player Northstar 8000i Remote Keypad Northstar 8000i C-MAP Chart License Key Northstar 8000i Video InterfaceNorthstar GPS Antenna NS004743 Other Components AutopilotMounting and Calibration Heading SensorAudio NMEA-0183 Data GLLGSA Mass Storage Devices Description Place in 8000i System Human Interface DevicesNetwork Camera Other Functions Location GuideMounting the 8000i 12 inch Display Processor Choosing the best mounting locationViewing Angle Page Page Wiring Guidelines Power 8000i System Power requirements Northstar 8000i Black BoxGPS Port External Wake Up and Remote Power On Utility PortConnect this to the Light Green wire on Page Nmea Nmea Multiplexer Noland NM42Wiring External Alarm Connect the followingPage USB Auxiliary port RGB port NetworkPage Field Terminated Network Cable Brown White/Brown Blue White/Green White/Blue Terminating a Northstar 8000i RJ45 Field Kit Before crimp After crimp 8000i Chart Plotter Example System Layouts8000i Plotter Sounder NS004743 Northstar GPS Antenna Entertainment Northstar 8000i Processor Full System Northstar Black Box Processor NS004730 To adjust the backlight brightness Northstar 8000i Initial SetupAdjust the brightness on a 12 inch Display Processor Turn on the 12 inch Display ProcessorSet the network master unit To set the masterTo install chart collections Install the chart dataInstall Charts interface To install all collectionsTurn off the 12 inch Display Processor To select your time zone Set the system preferencesTo select the time format To turn the beeps on or offChange the transducer depth To change the transducer depthTo turn the backlight on or off Turn the keypad backlight on or offTo specify your vessel statistics To show or hide the top control barSpecify your vessel statistics Set the location of the media librarySet Nmea Output To select Nmea Output sentencesTo calibrate the touch screen Set Nmea Baud RateCalibrate the touch screen Set the device processor nameSet the screen resolution Set the unitsTo select the small scale distance units To select the volume units for liquidsTo select the large scale distance units Select the temperature units To select the temperature unitsTo set up the radar before using it Set up the radar before using it for the first timeChange the radar range offset trigger delay To change the radar startup modeChange the radar startup mode To change the parking angle To change the radar range offsetTo change the radar bearing alignment Change the radar bearing alignmentSounder To change the offset for the water temperatureTo change the water temperature averaging time To change the speed offsetChange the sounders speed filter InstrumentsTo create an instrument panel Create an instrument panelTo rename an instrument panel To add a new instrumentTo resize an instrument Resize an instrumentTo delete an instrument panel Delete an instrument panelMaintenance Technical support, service and repairsRestore processor software RestoreRestore settings and information To restore the system processorThere two types of upgrade for a 8000i processor Upgrading the 8000i systemSystem image upgrade Install a software patch to multi processor systemInstall a system image upgrade Software patch multi-processor system MasterThirty minutes System will then restart automatically Specifications DisplayUnited States Europe Northstar