Belkin 8000I installation manual Northstar 8000i 8 Port Network Linker

Page 20

DON'T install the scanner inside of the recommended compass safe distances of any

navigation instruments such as the magnetic compass and the chronometer. The compass

safe distances are as follows:

2 kW radar

STD 2.3 ft (0.7 m)

 

STEER 1.6 ft (0.5 m)

 

 

4 kW radar

STD 6.5 ft (2.0 m)

 

STEER 5 ft (1.5 m)

 

 

6 kW radar

STD 7.5 ft (2.3 m)

 

STEER 5.7 ft (1.75 m)

 

 

10 kW radar

STD 7.9 ft (2.4 m)

 

STEER 6 ft (1.8 m)

 

 

25 kW radar

STD 7.9 ft (2.4 m)

 

STEER 6 ft (1.8 m)

 

 

6.5Northstar 8000i 8 Port Network Linker

Northstar 8000i 8 Port Network Linker NS004721

Description

The Northstar 8000i 8 Port Network Linker is a marinized 100 base ethernet switch.

Place in 8000i System

The Northstar 8000i 8 Port Network Linker is used to connect up to eight (8) Northstar 8000i network devices. Use the Linker when joining three (3) or more network devices together. You can use a crossover cable when joining just two (2) network devices together. Connect more than one linker together to give 16, 24 etc ports

Northstar 8000i System - 12" Display Processor Installation Manual

20

Image 20
Contents Northstar Please read carefully before use Important Safety InformationPreface Ft 0.5 m Warranty DisclaimerContents Example System Layouts Maintenance Introducing the Northstar 8000i System Check the 12 inch Display Processor partsChart License Key NS004820 Page Find your way around the 12 inch Display Processor PPIRGB Network Master Unit 8000i System Installation Installation Sequence Summary GuidelinesNorthstar 8000i 12 inch Display Processor DescriptionPlace in 8000i System Optional PartsPower requirements Northstar 8000i Black Box ProcessorLocation Guide MountingNorthstar 8000i 15 inch Monitor Other parts required Functions Power requirements Voltage Fuse DrawNorthstar 8000i Network Radar Northstar 8000i 8 Port Network Linker Northstar 8000i 4 Port USB Hub Northstar 8000i 1 kW Network Sounder FunctionalityNorthstar 8000i DVD-CD Player Northstar 8000i Remote Keypad Northstar 8000i C-MAP Chart License Key Northstar 8000i Video InterfaceNorthstar GPS Antenna NS004743 Other Components AutopilotMounting and Calibration Heading SensorAudio NMEA-0183 Data GLLGSA Mass Storage Devices Human Interface Devices Network CameraDescription Place in 8000i System Other Functions Location GuideMounting the 8000i 12 inch Display Processor Choosing the best mounting locationViewing Angle Page Page Wiring Guidelines Power 8000i System Power requirements Northstar 8000i Black BoxGPS Port External Wake Up and Remote Power On Utility PortConnect this to the Light Green wire on Page Nmea Nmea Multiplexer Noland NM42Wiring External Alarm Connect the followingPage USB Auxiliary port RGB port NetworkPage Field Terminated Network Cable Brown White/Brown Blue White/Green White/Blue Terminating a Northstar 8000i RJ45 Field Kit Before crimp After crimp 8000i Chart Plotter Example System Layouts8000i Plotter Sounder NS004743 Northstar GPS Antenna Entertainment Northstar 8000i Processor Full System Northstar Black Box Processor NS004730 Northstar 8000i Initial Setup Adjust the brightness on a 12 inch Display ProcessorTo adjust the backlight brightness Turn on the 12 inch Display ProcessorSet the network master unit To set the masterInstall the chart data Install Charts interfaceTo install chart collections To install all collectionsTurn off the 12 inch Display Processor Set the system preferences To select the time formatTo select your time zone To turn the beeps on or offTo change the transducer depth To turn the backlight on or offChange the transducer depth Turn the keypad backlight on or offTo show or hide the top control bar Specify your vessel statisticsTo specify your vessel statistics Set the location of the media librarySet Nmea Output To select Nmea Output sentencesSet Nmea Baud Rate Calibrate the touch screenTo calibrate the touch screen Set the device processor nameSet the screen resolution Set the unitsTo select the small scale distance units To select the volume units for liquidsTo select the large scale distance units To select the temperature units To set up the radar before using itSelect the temperature units Set up the radar before using it for the first timeChange the radar range offset trigger delay To change the radar startup modeChange the radar startup mode To change the radar range offset To change the radar bearing alignmentTo change the parking angle Change the radar bearing alignmentTo change the offset for the water temperature To change the water temperature averaging timeSounder To change the speed offsetInstruments To create an instrument panelChange the sounders speed filter Create an instrument panelTo add a new instrument To resize an instrumentTo rename an instrument panel Resize an instrumentTo delete an instrument panel Delete an instrument panelMaintenance Technical support, service and repairsRestore Restore settings and informationRestore processor software To restore the system processorThere two types of upgrade for a 8000i processor Upgrading the 8000i systemInstall a software patch to multi processor system Install a system image upgradeSystem image upgrade Software patch multi-processor system MasterThirty minutes System will then restart automatically Specifications DisplayUnited States Europe Northstar