Description
The 8000i System provides audio from music or movies that are played on the system. Audio out is achieved by connecting the 8000i processor to an external amplifier and speakers. This could be a car stereo head unit with Aux in or a high end home theater system
Functionality
Left and right audio channel out
Left and right audio channel in
Microphone in
Place in 8000i System
Although music files can be stored on any 8000i system processor, the audio output is local to the processor that produces it.
Other parts required
Amplifier and speakers
Location Guide
Be careful running composite audio cable near power cables or other sources of interference as electrical interference can cause a hiss or hum over the speakers. And keep the length to minimum
Mounting
Connect to Aux port on a 8000i processor
6.13.4 NMEA-0183 Data
Description
Place in 8000i System
NMEA should be connected to the master processor
Optional Parts
For more NMEA inputs use the Noland MN 42 4 port multiplexer (see "NMEA Multiplexer (Noland NM42)" page 44). This expands the 8000i from one NMEA in to four NMEA inputs.
If more NMEA outputs are required use the Noland XP15 four port expander. This will take the output of the 8000i processor and provide four duplicated NMEA ports
Location Guide
Connect all NMEA inputs and outputs to the master 8000i processor only
The following is a list of
Sentence | Input |
|
|
DBT | Depth below the transducer |
|
|
|
|
|
|
DPT | Depth |
|
|
|
|
|
|
GGA | Global Positioning System Fix Data |
|
|
|
|
|
|
GLL | Geographic Position, Latitude / Longitude |
|
|
| Northstar 8000i System - 12" Display Processor Installation Manual | 29 |
|
|
|