![](/images/new-backgrounds/1271947/27194743x1.webp)
Functionality
Allows up to four (4) USB devices to be connected to a 8000i processor.
Can accept the following devices
•NS004740 Northstar 8000i
•NS004747 Northstar 8000i Remote Keypad (see "Northstar 8000i Remote Keypad" page 24)
•NS004745 Northstar 8000i Video Interface (see "Northstar 8000i Video Interface" page 25)
•
•NS004710 Northstar 8000i 15" Monitor (see "Northstar 8000i 15 inch Monitor" page 17)
•MS Windows Compliant Human Interface Devices
•MS Windows XP Compliant USB Mass Storage Devices
Place in 8000i System
This unit attaches to a Northstar 8000i system processor via the supplied USB Cable. The processor needs to be on for the USB Hub to operate
Optional Parts
USB Devices (see above)
Location Guide
Needs to be within a 16.5 ft (5 m) Cable run from the system processor
Mounting
Preferably mount vertically on to a panel. Create drip loops with all cables
Power Requirements
Voltage: 10 V DC - 35 V DC: current draw 12.5 W
6.7Northstar 8000i 1 kW Network Sounder
Northstar 8000i 1 kW Network Sounder NS004741
Northstar 8000i System - 12" Display Processor Installation Manual
22