Pioneer DEH-1020E, DEH-1000E operation manual Audio Adjustments

Section

02Operating this unit

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1Press FUNCTION to select SCAN.

2Press a to turn scan play on.

SCAN appears in the display. The first 10 sec- onds of each track is played.

Using the equalizer

There are six stored equalizer settings such as

DYNAMIC, VOCAL, NATURAL, CUSTOM, FLAT and POWERFUL that can easily be re- called at any time.

!CUSTOM is an adjusted equalizer curve that you create.

!When FLAT is selected no supplement or correction is made to the sound.

3When you find the desired track press

b to turn scan play off.

# If the display has automatically returned to the playback display, select SCAN again by press-

ing FUNCTION.

# After scanning of a CD is finished, normal playback of the tracks will begin again.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers:

DYNAMIC—VOCAL—NATURAL—CUSTOM

—FLAT—POWERFUL

Pausing disc playback

Pause lets you temporarily stop playback of the disc.

1Press FUNCTION to select PAUSE.

2Press a or b to turn pause on or off.

# To return to the normal display, press BAND.

Audio Adjustments

Using balance adjustment

Fader/balance setting creates an ideal listen- ing environment in all occupied seats.

1Press AUDIO to select FAD.

2Press a or b to adjust front/rear speak- er balance.

FAD F15 to FAD R15 is displayed.

# FAD 0 is the proper setting when only two speakers are used.

3Press c or d to adjust left/right speaker balance.

BAL L15 to BAL R15 is displayed.

# To return to the normal display, press BAND.

Adjusting equalizer curves

You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM.

Adjusting bass/mid/treble

You can adjust the bass/mid/treble level.

1Press AUDIO to select BASS/MID/

TREBLE.

2Press a or b to adjust the level.

+6 to –6 is displayed as the level is increased or decreased.

#To return to the normal display, press BAND.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Press AUDIO to select LOUD.

2Press a or b to turn loudness on or off.

# You can also turn loudness on or off by press- ing and holding EQ.

3Press c or d to select a desired level.

LOW (low)—HI (high)

# To return to the normal display, press BAND.

10 En